Device and Enclosure Specifications | Black Box LWN602WA guide

SmartPath Enterprise Wireless Access Point, Outdoor Installation Guide

•To protect the LWN602WA from lightning, do not place it at the highest point of a building or structure.

•To protect your network from lightning, place a 10-/100-/1000BASE-T shielded CAT6 PoE af compatible lightning protector (outdoor: AL-CAT6JTW, indoor: HGLN-CAT6JT) inline between the LWN602WA and the rest of the network. Refer to the installation instructions for the Ethernet protector in the Chapter 9 of this manual.

WARNINGS:

To install the LWN602WA, you must be a qualified installation professional, licensed or certified in accordance with local regulations.

Use only attachments and accessories specified by Black Box.

During operation, the surfaces of the LWN602WA can become hot. Use caution when handling it.

Make sure that the LWN602WA is connected to a suitably installed ground conductor. Contact the appropriate electrical inspection authority if you are uncertain that suitable grounding is available.

Do not locate the LWN602WA enclosure near overhead power lines or other electric light or power circuits, or where it can come into contact with such circuits. During installation, exercise extreme care not to come into contact with these circuits, which can cause serious injury or death. For proper installation and grounding of the product, refer to national and local electrical codes: NFPA (National Fire Protection Association) 70, National Electrical Code Article 810 (U.S.); Canadian Electrical Code, Part I, CSA

22.1and Section 54 (Canada); and if local or national electrical codes are not available, refer to IEC (International Electrotechnical Commission) 364, Part 1 through 7 (other countries).

Do not connect or disconnect antennas or cables from the LWN602WA during periods of lightning activity.

3. Device, Power, and Environmental Specifications

Understanding the range of specifications for the LWN602WA is necessary for optimal deployment and device operation. The following specifications describe the hardware components, Power over Ethernet (PoE) electrical requirements, and the environmental ranges in which the device can operate.

3.1 Device and Enclosure Specifications

Mounting Options — Horizontal or vertical pole mount; pole must be 1" to 3.5" (2.5 cm to 8.9 cm) in diameter, Wall or flat surface mount

Connectors — (1) RJ-45 Ethernet connector: autosensing 10/100/1000 BASET Mbps; compliant with the IEEE 802.3at standard for PoE

Size — Without antennas: 3"H x 77⁄8"W x 95⁄8"L (7.6 x 20 x 22.4 cm)

Weight — With antennas: 4.85 lb. (2.199 kg);

With antennas and brackets: 6.05 lb (2.744 kg)

Antennas — (4) N-type female connectors for external antennas

3.2 Power Specifications

PoE Nominal Input Voltage — 48 V, 30 watts

3.3 Environmental Specifications

Temperature Tolerance — Operating: -40 to +131° F (-40 to +55° C);

Storage: -40 to +176° F (-40 to +80° C)

Relative Humidity — Up to 100%

Wind Speed Tolerance — > 165 mph (266 kph)

Environmental Compliance — IP68

Page 4

724-746-5500 blackbox.com

LWN602WA, SmartPath Enterprise Wireless Access Point specifications

The Black Box SmartPath Enterprise Wireless Access Point, model LWN602WA, represents a significant advancement in wireless networking technology, tailored specifically for enterprises seeking robust connectivity and seamless user experiences. This device is engineered to support high-density environments, making it ideal for offices, schools, and public venues where multiple users access the network simultaneously.

One of the standout features of the LWN602WA is its dual-band capability. It operates on both the 2.4 GHz and 5 GHz frequency bands, allowing for increased bandwidth and reduced interference. This dual-band functionality is crucial for environments that demand reliable connections among numerous devices. The access point can intelligently steer clients to the optimal band based on their needs, thereby enhancing overall network performance.

The LWN602WA also incorporates advanced 802.11ac Wave 2 technology, ensuring it delivers high-speed wireless connectivity. With support for MU-MIMO (Multi-User, Multiple Input, Multiple Output), the access point can communicate with multiple devices simultaneously, significantly improving performance in crowded spaces. This technology is particularly valuable in enterprise settings where many users are connected at once, as it minimizes latency and boosts throughput.

Security is another critical feature of the LWN602WA. It supports numerous security protocols, including WPA3, which enhances encryption and protects data from unauthorized access. The device also supports VLANs, allowing organizations to segment their network traffic efficiently, which is essential for maintaining performance and security in enterprise environments.

The LWN602WA is designed for ease of deployment and management. It supports Power over Ethernet (PoE), eliminating the need for separate power sources and enabling flexible installation options. With its user-friendly web interface and support for centralized management software, network administrators can easily monitor and configure the access point, ensuring optimal performance and security.

Additionally, the access point is built to withstand the rigors of a commercial environment. Its sleek design and durable construction make it an aesthetically pleasing yet resilient component of any enterprise network.

In summary, the Black Box SmartPath Enterprise Wireless Access Point LWN602WA is a powerful solution that combines dual-band operation, advanced 802.11ac Wave 2 technology, robust security features, and easy management capabilities, making it a smart choice for enterprises aiming to enhance their wireless infrastructure. Its ability to support high user density, paired with strong performance, positions it as a leader in the enterprise wireless access market.