Chapter 4 Installing the Cisco VG350 Voice Gateway
Mounting Tools and Equipment
Mounting Tools and Equipment
Obtain the following tools and parts to install a Cisco VG350 Voice Gateway:
•Standard
•Phillips screwdriver for attaching brackets to a Cisco VG350 Voice Gateway
•Mounting brackets and screws for
–Four telco machine screws, for installing the chassis in a rack (use the screw size required by the rack)
•Screws and anchors for
–Eight wood screws or other fasteners, for installing the chassis on a wall. An additional starter screw can be used to facilitate
•
In addition, you might need the following external equipment:
•Console terminal or PC with terminal emulation software
•PC running terminal emulation software for administrative access
•Modem for remote access
•Analog voice
•Ethernet switch
•Modem for remote configuration
Unpacking and Inspection
Do not unpack the Cisco VG350 until you are ready to install it. If the installation site is not ready, keep the chassis in its shipping container to prevent accidental damage.
The Cisco VG350, cables, printed publications, and any optional equipment you ordered might be shipped in more than one container. When you unpack each shipping container, check the packing list to ensure that you received all the following items:
•Cisco VG350 Voice Gateway
•Power cord,
•
•
•
•Chassis guard for
•Grounding lug and fasteners
•Read Me First for Cisco VG350 Voice Gateway
Inspect all items for shipping damage. If anything appears damaged, or if you encounter problems when installing or configuring your system, contact a customer service representative. (See the “Obtaining Documentation” section on page
Cisco VG350 Voice Gateway Hardware Installation Guide
|
| ||
|
|