Chapter 4: Installation
4.2 Connecting and Setting up Audio (AVSW-DVI8X8 only)
The 8X8
The balanced connection transmits a pair of balanced signals along two cables. Because interference will have the same intensity and the opposite phases on the two cables, the two signals will balance each other. For the low frequency end of the audio signal especially might be susceptible to interference across a long transmission. The balanced connection, therefore, should be used where sound quality is a premium.
The unbalanced connection transmits signals along one cable, and is more easily subjected to interference. It is recommended that this connection be used for consumer electronics or in instances where the need for superior quality is not an issue.
The Matrix Switch features an impedance control to enable you to adjust the impedance, which reduces the noise across a long cable run.
Figure 4-5. Example of Connection: Balanced Input
Figure 4-6. Example of Connection: Balanced Output
Figure 4-7. Example of Connection: Unbalanced Input
Figure 4-8. Example of Connection: Unbalanced Output
Page 14 |