Black Box LPB724A, LPB716A, LPB708A manual Bandwidth Control, Port Mirroring screen

8-/16-/24-Port 10/100 PoE PSE Web Smart Switch

Parameter description:

Destination Port: Select the port for monitoring and the egress traffic will be copied to the monitoring port.

Monitor Packets: Enable or Disable if you want to copy the packet from source port to destination port.

Source Port: Select the port you want to monitor the traffic. The traffic will be copied to the monitoring port.

Figure 4-10. Port Mirroring screen.

4.3.3 Bandwidth Control

Function name: Bandwidth Control

Function description: You can limit the bandwidth of received and transmitted frames to each port.

Parameter description: Port Number: Select the port you want to configure.

Tx Rate Value: Set the transmission rate to the selected port. The value can be from 0~255. 0 means full speed.

Rx Rate Value: Set the receiving rate to the selected port. The value can be from 0~255. 0 means full speed.

Resolution: You can choose low or high resolution. Low resolution is 32 kbps and high is 512 kbps.

Connection Speed	Resolution	Tx Rate Value	Rx Rate Value
10 Mbps	Low: 32 kbps	0–255	0–255
10 Mbps	High: 512 kbps	0–19	0–19
100 Mbps	Low: 32 kbps	0–255	0–255
100 Mbps	High: 512 kbps	0–195	0–195

In the screen shown on the next page, the table will list each port’s Tx and Rx rate.

24 724-746-5500 l www.blackbox.com