Black Box 8-/16-/24-Port 10/100 PoE PSE Web Smart Switch, LPB724A manual QoS Setting Priority Mode

Chapter 6: IP Address Assignment

Figure 4-19. Per Port Counter screen.

4.6 QoS Setting

4.6.1 Priority Mode

Function name: Priority Mode

Function description: This is the page that allows you to configure QoS (Quality of Service) to enhance network performance. This switch supports three types of QoS.

Parameter description: Mode: There are three Priority Modes to select.

First-In-First-Service: The first receiving packet will be firstly transmitted.

All-High-Before-Low: All packets will be assigned to either high priority queue or low priority queue.

4 Queue WRR (Weight-Round-Robin): Set the ratio of the transmitting packet.

Figure 4-20. Priority Mode screen.

4.6.2 Class of Service

Function name: Class of Service

Function description: You can set QoS mode of per port by different types of services. The switch supports four queues: TCP/UDP, IP TOS/DS, 802.1p, and Physical Port.

724-746-5500 l www.blackbox.com 31