Asus PCEN10 Installing the PCE-N10 driver and utilities, Click Install to start the installation

Page 11

PCE-N10 WLAN Card User Manual

2. Installing the PCE-N10 driver and utilities

IMPORTANT: Install the ASUS PCE-N10 WLAN Card into your computer before installing the driver and utilities from the bundled Support CD.

To install the driver and utilities for your ASUS PCE-N10 WLAN Card:

1.Place the bundled Support CD into the optical drive. An Autorun screen appears if the Autorun function is enabled on your computer.

NOTE: If the Autorun function is not enabled on your computer, double-click SETUP.EXE from the root directory to run the Support CD.

2.From the Autorun screen, select your language and click Install Utilities/ Driver.

3.An InstallShield Wizard screen appears. Click Next to continue.

4. Click Install to start the installation.	5. Select Yes, I want to restart my
	computer now. Click Finish to
	complete the installation.

6.After your computer reboots, select Use ASUS WLAN utilities to allow the ASUS utility to manage your WLAN card. Click OK.

ASUS WLAN Card

Image 11

Contents E6391 / February PCE-N10Copyright 2011 ASUSTeK Computer Inc. All Rights Reserved Technical support Manufacturer contact informationASUSTeK Computer Inc. Asia-Pacific Asus Computer International AmericaTable of contents FCC Radiation Exposure Statement Federal Communications CommissionProhibition of Co-location Article CE Mark WarningDGT Warning Statement IC Warning StatementIC Radiation Exposure Statement Asus Recycling/Takeback ServicesEC Declaration of Conformity Authorised distributors Manufacturer ASUSTeK Computer IncAsus Computer GmbH EuropeHardware Package contentsIntroduction System requirementsComplete the installation Installing the PCE-N10 driver and utilitiesClick Install to start the installation Connecting to a wireless network manually Configuring PCE-N10 using Asus utilitySelect Use the WPS button, then click Next Connecting to a wireless network using WPSSelect Use PIN code Soft AP mode Windows XP/Vista/7 ACL Access Control List fieldAsus Wlan Control Center Asus Wlan Card Setting UtilityAsus Wlan Card Setting Utility system tray icon Software informationAsus Wlan Card Others Config BasicConfig Encryption Manually Config AdvancedClick Windows Wireless to use it Configuring PCE-N10 using Windows WZC serviceConnection quality is bad and the signal strength is weak TroubleshootingHow do I verify that my Wlan card is installed properly? My Wlan card cannot connect to any Access PointsTCP/IP protocol does not bind to the Wlan Card Glossary Device Name Default KeyDhcp Dynamic Host Configuration Protocol Cofdm for 802.11a or 802.11gDirect-Sequence Spread Spectrum for 802.11b DNS Server Address Domain Name SystemDSL Modem Digital Subscriber Line Ethernet Extended Service Set ESSEssid Extended Service Set Identifier EncryptionIeee 802.11a 54Mbits/sec IeeeInfrastructure Ieee 802.11b 11Mbits/secIeee 802.11g IP Address ISP Internet Service ProviderMAC Address Media Access Control IP Internet ProtocolPPP Point-to-Point Protocol NIC Network Interface CardPacket Pass PhraseStation Ssid Service Set IdentifierWeca Wireless Ethernet Compatibility Alliance Radio Frequency RF Terms GHz, MHz, HzRequirements WPA Wi-Fi Protected AccessWlan Wireless Local Area Network

2. Installing the PCE-N10 driver and utilities

4. Click Install to start the installation.

complete the installation.