Asus PCEN10 user manual Acl, Access Control List field

Page 16

PCE-N10 WLAN Card User Manual

In the Soft AP mode, you can limit the wireless clients that associate with the WLAN card through the access control function. Click Configuration > Edit Config >

ACL.

To disable the access control function, select Disable from the Access Control Policy dropdown list.

To allow a wireless client to associate with the WLAN card:

1.Select Accept from the Access Control Policy dropdown list

2.Key in its MAC address in the

Access Control List field.

3.Click Add.

Only the wireless clients on the Accept

list are allowed to associate with the WLAN card.

To prevent a wireless client from associating with the WLAN card:

1.Select Reject from the Access Control Policy dropdown list.

2.Key in its MAC address in the Access Control Policy field.

3.Click Add MAC.

The wireless clients on the Reject list are not allowed to associate with the WLAN card.

ASUS WLAN Card

13

Image 16
Contents PCE-N10 E6391 / FebruaryCopyright 2011 ASUSTeK Computer Inc. All Rights Reserved Manufacturer contact information ASUSTeK Computer Inc. Asia-PacificAsus Computer International America Technical supportTable of contents Prohibition of Co-location Federal Communications CommissionFCC Radiation Exposure Statement CE Mark Warning DGT Warning StatementIC Warning Statement ArticleAsus Recycling/Takeback Services IC Radiation Exposure StatementEC Declaration of Conformity Manufacturer ASUSTeK Computer Inc Asus Computer GmbHEurope Authorised distributorsPackage contents IntroductionSystem requirements HardwareClick Install to start the installation Installing the PCE-N10 driver and utilitiesComplete the installation Configuring PCE-N10 using Asus utility Connecting to a wireless network manuallyConnecting to a wireless network using WPS Select Use the WPS button, then click NextSelect Use PIN code Soft AP mode Windows XP/Vista/7 Access Control List field ACLAsus Wlan Card Setting Utility Asus Wlan Card Setting Utility system tray iconSoftware information Asus Wlan Control CenterAsus Wlan Card Config Basic OthersConfig Encryption Config Advanced ManuallyConfiguring PCE-N10 using Windows WZC service Click Windows Wireless to use itTroubleshooting How do I verify that my Wlan card is installed properly?My Wlan card cannot connect to any Access Points Connection quality is bad and the signal strength is weakTCP/IP protocol does not bind to the Wlan Card Glossary Default Key Dhcp Dynamic Host Configuration ProtocolCofdm for 802.11a or 802.11g Device NameDSL Modem Digital Subscriber Line DNS Server Address Domain Name SystemDirect-Sequence Spread Spectrum for 802.11b Extended Service Set ESS Essid Extended Service Set IdentifierEncryption EthernetIeee Ieee 802.11a 54Mbits/secIeee 802.11g Ieee 802.11b 11Mbits/secInfrastructure ISP Internet Service Provider MAC Address Media Access ControlIP Internet Protocol IP AddressNIC Network Interface Card PacketPass Phrase PPP Point-to-Point ProtocolSsid Service Set Identifier Weca Wireless Ethernet Compatibility AllianceRadio Frequency RF Terms GHz, MHz, Hz StationWlan Wireless Local Area Network WPA Wi-Fi Protected AccessRequirements