ICON Enterprises SB-100 manual Employee Setup Quick Pick, ID number

Employee Setup (Optional)

EMPLOYEE SETUP (Quick Pick 60)

The SB-100 comes pre-programmed with Employee ID Numbers so you do not need to add them to the system. If you wish, you may edit the names and assign hourly pay rates to further customize your system.

1)Enter Supervisor Mode and select Employee Setup.

2)Enter the three-digit ID number for the employee you

wish to edit. may be used to scroll through an alphabetical list if you do not know the employee's

ID number.

3)Use to scroll through the alphabet and spell the employee's name as you wish it to appear on the

screen and reports. Press ENTER to step forward to the

next letter and press CLEAR to backspace if you make an

error. Pressing for an extended period will rapidly scroll through the alphabet. After the last letter

is selected, the Time Clock will display the Pay Rate screen.

4)Enter the pay rate for this employee. You may use the number keys to speed this process.

The following Employee ID's come pre-programmed in the SB-100™ Employee Time Clock:

001	023	045	067	089
101	123	145	167	189
201	223	245	267	289
301	323	345	367	389
401	423	445	467	489
501	523	545	567	589
601	623	645	667	689
701	723	745	767	789
801	823	845	867	889
901	923	945	967	989

7