Lathem 1200 Series user manual Set the Time on the Clock Face

Page 7

1200 Series User’s Manual

the Type Section down and press it firmly into the Type Section Headlock.

8.Make a sample registration and verify the time and date or day is correct.

9.Replace and lock the case cover.

Set the Time on the Clock Face

Figure 3

1.Make a sample registration on paper.

2.Rotate Clock Face Setting Wheel 3.1 until the clock face displays the same time as shown on the sample registration.

DO NOT TURN CLOCK HANDS EXCEPT BY USING SETTING WHEEL.

Image 7

Contents Series Lathem Time Corporation Contents Http//shop.lathem.com Ordering AccessoriesRaise the Type Section Setting the TimeSet the Time on the Type Wheels Set the Time on the Clock Face Changing the Ribbon Remove Type Section Retaining Ring Replacing the Type SectionChanging the Motor One-Year Limited Warranty WarrantyOMTR12-0603