Graco 333492B important safety instructions Equipment Misuse Hazard

Page 6

Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS from distributor or retailer.

Do not leave the work area while equipment is energized or under pressure.

Turn off all equipment and follow the Pressure Relief Procedure when equipment is not in use.

Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manu- facturer’s replacement parts only.

Do not alter or modify equipment. Alterations or modifications may void agency approvals and create safety hazards.

Make sure all equipment is rated and approved for the environment in which you are using it.

Use equipment only for its intended purpose. Call your distributor for information.

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

Do not kink or over bend hoses or use hoses to pull equipment.

Keep children and animals away from work area.

Comply with all applicable safety regulations.

PRESSURIZED ALUMINUM PARTS HAZARD

Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious chemical reaction and equipment rupture. Failure to follow this warning can result in death, serious injury, or prop- erty damage.

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents.

Many other fluids may contain chemicals that can react with aluminum. Contact your material sup- plier for compatibility.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment when in the work area to help prevent serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This protective equipment includes but is not limited to:

Protective eyewear, and hearing protection.

Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer

6

333492B

Image 6
Contents Important Safety Instructions List of ModelsSDMM8 Manual Meters with Nozzle and Extension Packages ModelsSDMM8 Manual Bare Meters Model Number Model Description InletSDMP8 Preset Meters SDMP8 Preset Meters with Nozzle and Extension Packages Fire and Explosion Hazard Equipment Misuse Hazard Typical Installation KeyInstallation Pressure Relief ProcedureGrounding Component Identification Installing Meter FIG Pre-Installation ProcedureInstallation Procedure FlushingInstallation Preset Automatic Shutoff OperationManual Shutoff Valve Troubleshooting Problem Cause SolutionService Cleaning / Repairing the Fluid SectionDisassembly SDMM8 Manual Meter Counter Section RepairReassembly SDMP8 Preset Meter Counter Section Repair Remove the entire counter assembly 31 SDMM8 Manual Meter Parts Models 24U959, 24U960, 24U961, 24U956, 24U957, 24U958SDMM8 Manual Meter Parts Description QtySDMP8 Preset Meter Parts 43aSDMP8 Preset Meter Parts Needle Nozzle 101 and Extension 102 Kits Kit No DescriptionNozzle 101 Parts Description Qty Fluid TypeTechnical Data Manual and Preset Meter MetricDimensions Manual Meter Preset MeterGraco Extended Meter Warranty Graco Information