To recall text from memory
Example: To recall the contents of Area 2 while memory contains the following text.
To delete text from memory
1.While the input screen is on the display, press FUNCTION and then 1 (MEMO).
Area 1: ABCDEFG
Area 2: CASIO
1.While the input screen is on the display, press FUNCTION and then 1 (MEMO).
•Note that text recalled from memory will replace any text currently on the display.
2.Press L a number of times to change to the text delete prompt.
3.Press SET.
• If all of the text does not fit on the display, you |
can use H and J to scroll it to the left and right. |
DEL?
ABCD
2.Press L a number of times to change to the text recall prompt.
3.Press SET.
•If all of the text does not fit on the display, you can use H and J to scroll it to the left and right.
CAL?
ABCD
4.Use K and L to select Area 1 or Area 2 then press SET.
Area 1 text
OK?
4. Press L to change to Area 2.
•Use K and L to switch between Area 1 and Area 2.
5.Press SET to recall the text from the area that is currently on the display.
•Note that recalling data from memory replaces anything that is currently on the input display. Memory text cannot be appended.
Area 1 text
CASI
Area 2 text
CASI
5. Press SET to delete the text from the area that is currently on the display.