Casio KL-100 manual Troubleshooting, Power Supply, Text Input

Item	Reset
Display	Cleared
Memory	Cleared
SYMBOL	,
EFFECT	CANCEL
STYLE	NORMAL
M-FEED	NO
MIRROR	OFF
MEMO	STR?
DENSITY	3
6 mm	OFF

Troubleshooting

• Power Supply

Nothing appears on the display.
Possible Causes	Action
Low batteries	Replace batteries.
Batteries loaded incor-	Remove batteries and reload them correctly.
rectly
AC adaptor is not con-	Make sure the AC adaptor is connected cor-
nected correctly.	rectly.

• Text Input

	Cannot input text.
Possible Cause	Action
FUNCTION key has been	Press ESC to clear FUNCTION key operation.
pressed.

Tape does not come out when PRINT is pressed.

Possible Causes	Action
Back cover is not closed	Securely close the back cover.
completely.
No more tape left in the	Replace the tape cartridge with a new one.
cartridge.
Tape jam	Remove the tape cartridge and pull out the
	jammed tape by hand. Cut off excess tape with
	scissors, and carefully replace the cartridge into
	the label printer.
	Important!
	Never allow the tape outlet to become blocked
	and never touch tape as it is being fed during
	printing.

Tape comes out when PRINT is pressed, but nothing is printed on it.

Possible Cause	Action
Only blank spaces were	Input the text you want to print.
input.
Printing is blurred, blotched, broken, etc.
Possible Causes	Action
Improper print density set-	Adjust the print density setting.
ting
Improper loading of the	Remove the tape cartridge and reload it cor-
cartridge	rectly.
Dirty print head or rubber	Clean the printer head and roller.
roller

E-19