Casio KL-100 manual Error Messages, Alpha Characters Symbols, Message Possible Causes Action

Error Messages

Message	Possible Causes	Action
ERR!	• Attempt to input two B	• Use only one B mark.
* This message	marks within the same	Only two lines of text can
	text.	be input, so text can
appears on the
		contain only one B
screen for about
		mark.
one second.
	• Attempt to input B mark	• Do not use B marks.
	while 6mm is specified as	6mm tape can have only
	the tape width.	one line of text, so text
		cannot contain any B
		marks.
	• Label text containing a	• Delete the B mark to
	B mark was input and	print on 6mm tape or
	then tape width specifica-	switch back to a wider
	tion was changed to	tape.
	6mm. (ERR! message
	appears when you try to
	perform a print operation.)
	• Text that is longer than	• Shorten the text to be
	5.5cm when stamp	printed and try again.
	printing is selected.
	• Attempt to print a stamp	• Change the tape width
	or frame while 6mm is	setting to OFF and try
	specified for the tape	printing the stamp again.
	width.
FUL!	• Both text memory areas	• Delete text from one of
* This message	(AREA 1 and AREA 2)	the text memory areas
	already contain text.	and then store the new
appears on the
		text.
screen for about
one second.
BATT	• Battery power is too low.	• Replace batteries.
ERR!	• Memory data has become	• Initialize the Label
	corrupted for some	Printer.
	reason.

Alpha Characters

Symbols

E-21