Motorola H700 manual Making Calls, Indicator Lights Audio Tones

MAKING CALLS		MAKING CALLS CONTINUED
Function	Action
		Function	Action
Make a voice dial call	Tap the Call button	Answer a second	Press and hold the
	and speak the	incoming call	Call button (places
	name after the tone		first call on hold)
End a call	Tap the Call button	Toggle between two	Press and hold
Answer a call	Open headset boom	active calls	the Call button
		Join a 3-way call	Press and hold
	or tap the Call button
			both Volume buttons
	(if boom is already
	open)	Put an active call on	Press and hold the
Ignore a call	Press and hold the	hold or resume a call	Call button until you
		on hold	hear a beep
	Call button until you
	hear a beep	Transfer a call from the	Open headset boom
Redial last call	Press and hold the	phone to the headset
	Call button until you	Disable the	Press and hold
	hear a beep	indicator light	both Volume
			buttons for 3 to 4
Note: Your H700 supports both Handsfree and Headset			seconds
Profiles. Accessing call functions depends upon which		Mute or unmute a call	Tap both Volume
profile your phone supports. See your phone's user's guide			buttons
for more information.		Note: Some features are phone/network dependent.

	INDICATOR LIGHTS		AUDIO TONES
	With the Charger Plugged In		The audio tones provide information about your
			headset status.
	Indicator Light	Headset Status
Red (steady)		Charging (less than
			Audio Tone	Headset Status
		80% charged)
			Single high tone when	Volume at minimum
Yellow (steady)		Charging (more
			pressing Volume button	or maximum
		than 80% charged)	Five rapid high tones	Low battery
Green (steady)		Charging complete
			repeated every 60 sec.
	With No Charger Plugged In		No audio indications;	Out of range
			deteriorating quality
	Indicator Light	Headset Status
			Ring tone	Incoming call
Off		Power off
			Single high tone	Pairing confirmation
Purple (steady)		Pairing mode/
			Single low tone	Voice activation
		Volume button
			Dual high/low tone	Voice tag not
		orientation
Red		Battery low		recognized
			Single high tone	End call
Blue (10 rapid flashes)		Pairing successful
			Low to high tone	Phone network
Blue (slow pulse)		Connected (on a call)
				not available
Blue (quick flash)		Standby (not on a call)
			Two ascending tones	Mute enabled
Note: After 5 minutes of inactivity, the light stops flashing to
			Two descending tones	Mute disabled
conserve power, but the headset remains in standby mode.