Casio SE-S10 Basic Programming for Quick Start, Purpose, Mode Switch, Procedure, Example

Part-1 QUICK START OPERATION

8. Basic Programming for QUICK START

Mode Switch

REG CAL X Z

OFF

RF

PGM

Procedure

Purpose

1. To select the date format and monetary mode (if necessary)

You can select the date format and monetary mode after initialization depending on the requirements in your area. Default date format is Day/ Month/ Year and default monetary mode is add 2.

C

P3 appears in mode display

?ZXX

Program set code No.

X?p

Select number from list A

Select number from list B

(To end the setting)

Date Format Selections

A	Year/ Month/ Day		?
	Day/ Month/ Year		Z
	Month/ Day/ Year		X
Monetary Mode Selections
B	Add 0	(0.)	?
	Add 1	(0.0)	Z
	Add 2	(0.00)	X

Select date format

and

monetary mode

2. Input the desired add-in tax rate to the appropriate department key.

(This procedure below programs add-in tax rate only. If you want to set add-on tax or tax with special rounding, refer to page 27 of this manual.)

A)Enter 1and press the key.

B)Press the ~key.

C)Enter tax rate. (Example: For 6% enter “6”, 5.75% enter “5.75”.)

D)Press the appropriate department key.

E)Repeat step B) and C) to set other department key.

F)Press the key to end tax programming.

Note: In case of setting the wrong tax rate to the key, please enter ?and press

those department keys above, and quit this procedure by pressing key, and start from the beginning of this procedure.

Example :

Set add-in tax 8% to department 2, 3, 15% to department 4 key.

~Start tax program.

8 Enter tax rate and press dept key.

8Enter tax rate and press dept key.

15 Enter tax rate and press dept key. To end the setting.

Setting the tax rates

E

12