Hookup and Installation
Step 5
Connect Audio Components to Audio Filter 1 and Audio Filter 2 (Bank 04 and Bank 05)
The Belkin Power Console PF60 contains two isolated audio filters that are optimized to clean and condition the power to all of your audio components. The audio filters also isolate your audio components from connected digital, video, and
A. Attach Belkin power cord labels to each component’s power cord before you plug the cord into the corresponding outlet on the Power Console.
B.CD – Connect your CD player power cord to the outlet labeled “CD”.
C.Tape – Connect your tape player power cord to the outlet labeled “Tape”.
D.Auxiliary – This outlet can be used to connect any other audio equipment you may have.
E.Receiver (Preamp) – Connect your receiver or preamp power cord to the outlet labeled “Receiver”.
Note: You can connect any type of audio component into any of the audio filter outlets. You are not limited to the components listed above.
Belkin Power Console
12