Samsung SP-A900B manual Connecting to PC

Page 25

Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using the video cable.

-If the video equipment has S-VIDEO OUT port, connect it to [S-VIDEO IN] input port of the projector. Using the S-VIDEO connection, provides a higher visual quality.

When finishing connecting the devices, connect the power of the projector and the VCR.

Using the Projector

Turn on the projector and press the [Video] button to select <Video>.

or

Press the [S-VIDEO] button to select S-Video.

Check that the projector and the video equipment are turned off before connecting cables.

This projector does not support sound. (Separate audio system is needed for sound.)

Connecting to PC

Image 25

Contents Product color and shape may vary depending On the model Do not use loose power outlets or damaged power cables Insert the power plug firmly so that it does not come looseUnder no circumstances touch the power plug with wet hands Do not plug multiple devices into a single wall outletKeep the power cord away from heaters Unplug the power plug before cleaning the productDo not drop the product while carrying it Place the product on the ground carefullyKeep the product out of children’s reach If swallowed, see a doctor immediately Do not disassemble, or attempt to fix or modify the productTake care not to lose the lens cover of the product Make sure to place your remote control on a table or deskPage Front/Upper Side Optical engine with advanced DLP technologyLens Lens Position Moving Dial Package ContentsLED Indications Clearing Indicator ProblemsClassificationState MeasuresRear Side CenterMove /ENTER COMP1Model Supported Display Modes Supported Resolution/Size Modes Picture Position Modes DVI Select Menu Setup Install Rear-Floor Installing the ProjectorSelect Menu Setup Install Front-Floor Zoom and Focus AdjustmentAdjusting the Lens Position Moving Dial Leveling with Adjustable FeetScreen Size and Projection Distance VerticalYmm MinZmm MaxZmm Offset Ymm ScreenPage Rear of Projector Connecting a DVD player/Cable/Satellite Box to HDMI/DVIConnecting a DVD player/Cable/Satellite Box via Component Using the ProjectorConnecting to VCR/Camcorder Connecting to PC Using the Projector Component Screen DescriptionPlay/Stop AdjustmentVideo Play/Stop DescriptionPosition Adjust the screen position if it is not aligned Color Temperature Offset GainFor Hdmi Mode Zoom1Off Shows the picture in the original color SignalsOff ScreenInstall Adjustment DescriptionLight Setting Maximum and then perform Fine Adjustment againTime Sec 90 sec 10 sec 120 sec 30 sec Translucency Opaque Low Medium High60 sec Off Troubleshooting SymptomsSymptoms Troubleshooting Screen and External SourcePage Clean the projector using a soft dry cloth To clean the exterior and lens of the projectorTo clean the interior of the projector Lamp ReplacementNorth America Lamp Replacement ProcedureEurope Latin AmericaSlovakia Color Temperature Backlight Remote ControlAnalog Broadcast Antenna in PortRS-232C Port Service Input Port Gamma ModeExternal Input Overscan