Samsung SP-A900B manual Off Shows the picture in the original color, Signals, Screen

	1)	Off : Shows the picture in the original color.
	2)	Monochrome : Shows the picture in black and white by filtering out all color
		signals.
	3)	Red : Shows the picture in red by filtering out the green and blue color signals.
	4)	Green : Shows the picture in green by filtering out the red and blue color signals.
	5)	Blue : Shows the picture in blue by filtering out the red and green color signals.
Overscan	Using this function, you can cut the edge of the picture when unnecessary information,
	images appear on the edge of the picture.
	▶ Refer to "Size Support Mode".
	1)	Off
	2)	On

1080P/24fps This function displays the full 1080P@24Hz native HD signals which have 24 frames per

Modesecond with minimal scene distortion, as in a movie. Though the difference is small, this function implements the highest screen quality.

▶You can adjust 1080P/24 Frame mode in [HDMI 1] and [HDMI 2] modes only.

1)Off : Displays scenes where 24 frames are lengthened to 60 frames. Because of this process, irregular scenes may be generated.

2)On : Displays scenes where 24 frames are lengthened to 48 frames. All scenes are displayed regularly without any irregular scenes.

Film Mode Using this function, you can set the display mode optimized for playing movies when watching a movie. Film Mode provides optimal display settings for movies.

▶Film Mode is only supported for [Video], [S-Video] and [Component 1, 2](480i,576i).

1)Off

2)On

Input Picture Setup Option

* Click the Play()/Stop() button in the table below to view the video file.

Screen