Dim mode
You can select the desired brightness for the display.
•Press DIM to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.
™The DIM appears on the display.
™"DIM 1", "DIM 2", "DIM 3" or "DIM OFF" will be displayed depending on the mode selected.
DIM OFF - normal brightness with Spectrum Analyser On
FTS | TITLE |
| CHAP. | FM LW A M W | SLEEP DIM | TIMER |
P1 | P2 | P3 |
| P4 | P5 | P6 |
DIM 1 - normal brightness with Spectrum Analyser Off
FTS | TITLE |
| CHAP. | FM LW A M W | SLEEP DIM | TIMER |
P1 | P2 | P3 |
| P4 | P5 | P6 |
DIM 2 - half brightness with Spectrum Analyser On
FTS | TITLE |
| CHAP. | FM LW A M W | SLEEP DIM | TIMER |
P1 | P2 | P3 |
| P4 | P5 | P6 |
|
|
|
|
|
|
|
DIM 3 - half brightness with Spectrum Analyser Off and all LEDs on the system will be switched off.
FTS | TITLE |
| CHAP. | FM LW A M W | SLEEP DIM | TIMER |
P1 | P2 | P3 |
| P4 | P5 | P6 |
|
|
|
|
|
|
|
Volume Control
Adjust VOLUME to increase or decrease the sound level.
For Personal Listening
Connect the headphones plug to the n socket at the front of the system. The speakers will be muted.
Sound Control
For Optimal sound listening, you can only select one of the following sound controls at a time : VEC, PERSONAL or DSC .
VIRTUAL ENVIRONMENT CONTROL (VEC)
The VEC feature enables you to adjust the system to select a type of environment.
1Press to select the VEC feature.
2Adjust the JOG to select the desired VEC setting : HALL, CLUB, DISCO, CINEMA, CONCERT or ARCADE.
™The selected environment is encircled.
™"HALL, CLUB, DISCO, CINEMA, CONCERT or ARCADE" will be displayed.
OPERATING THE SYSTEM
PERSONAL SOUND
You can store up to 6 personal settings.
1Press to select the PERSONAL feature.
2Adjust the JOG to select the desired Personal setting.
™The selected personal setting number will appear on the display.
™If no name has been stored previously, "PERSONAL X" will be displayed. "X" is the setting number.
Personal Setting
You can adjust the personal setting to your desired level with the JOG control.
1Press and hold PERSONAL for about 5 seconds to switch on the personal setting mode.
™"SELECT PRESET NUMBER" will be displayed.
2Adjust the JOG to select the desired
preset number for personal setting and press áto confirm the selection.
™"ADAPT LOW FREQ LEVEL" will be displayed.
3Adjust the JOG to select the desired Spectrum Analyser band level for low frequency.
™The level will increase or decrease between+3 and
4Press áto confirm the selection.
™"ADAPT MID FREQ LEVEL" will be displayed, followed by "ADAPT HIGH FREQ LEVEL".
English
15
pg | 15 | 6/8/01, 11:32 AM | 3139 115 20054 |