Philips FW-D1 manual AM Loop Antenna Connection, FM Wire Antenna Connection, Wireless Surround Out

Page 9

AAM Loop Antenna

Connection

Connect the supplied loop antenna to the AM ANTENNA terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception.

BFM Wire Antenna

Connection

Connect the supplied FM wire antenna to the FM ANTENNA 75 Ω terminal. Adjust the position of the FM antenna for the best reception.

Outdoor Antenna

For better FM stereo reception connect an outdoor FM antenna to the FM ANTENNA 75 Ω terminal using a 75 Ω coaxial wire.

CAUTION:

–For optimal sound performance, it is recommended to use the supplied speakers.

–Do not connect more than one speaker to any one pair of +/-speaker terminals.

–Do not connect speakers with impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

DCentre Speaker Connection

(for model FW-D5 only)

Connect the black (non-marked) wires to the black CENTER terminal and the blue (marked wires) to the blue CENTER terminal.

FSubwoofer Out Connection

Connect the optional active subwoofer to the SUBWOOFER OUT terminal. The subwoofer reproduces just the low bass sound effect (e.g. explosions, the rumble of spaceships, etc.). Be sure to follow the instructions supplied with the subwoofer.

GWireless Surround Out

Connection (for model FW-D5

only)

You may connect the transmitter of the wireless rear speakers (not supplied) to the SURROUND OUT terminal.

Note:

– Availability of a wireless transmitter and

its peripherals are subjected to the

approval of local authorities. Please

PREPARATION

HLine Out Connection (wireless

ready)

You can connect the audio left and right LINE OUT terminals to a optional CD Recorder's ANALOGUE IN terminals. This allows you to record in an analogue format.

You can also install additional optional front active speakers away from the system (e.g. in another room) to reduce the inconvenience of running long speaker wires across rooms. You can place as many remote speakers as you like provided they operate at the same radio frequency. Connect the wireless radio frequency transmitter to the LINE OUT terminals. Place the active speakers at your preferred location. Be sure to follow the instructions supplied with the active speakers.

English

CSpeakers Connection

•Connect the right speaker to Front terminal R, with the coloured wire to + and the black wire to -.

•Connect the left speaker to Front terminal L, with the coloured wire to + and the black wire to -.

•Clip the stripped portion of the speaker wire as shown.

ERear Surround Speakers’ Connection (for model FW-D5

only)

Connect the black (non-marked) wires to the black REAR SURROUND terminals and the coloured (marked) wires to the grey REAR SURROUND terminals.

check with the respective local safety or

approving authority.

IConnecting other

equipment to your system

You can connect the audio left and right OUT terminals of a TV, VCR, Laser Disc player, DVD player or CD Recorder to the AUX/CDR IN terminals at the rear of the system.

12 mm

unlock

pg 001-41/D5-D1/21-Eng new

lock

9

9

6/8/01, 11:32 AM

3139 115 20054

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 3139 115 FW- D1D5México LEA Cuidadosamente Este InstructivoAntes DE Usar SU Aparato Laser Never Make or Change Connections with the Power Switched onFW-D5 FW-D1 Australia/New Zealand/Brasil/Mexico PortuguêsOperating The System IndexAccessories Supplied Safety InformationSafety Information General InformationRear Connections PreparationWireless Surround Out FM Wire Antenna ConnectionConnecting other Equipment to your system AM Loop Antenna ConnectionAC Power Supply Inserting batteries into the Remote ControlVideo Out Connection Audio Digital Out ConnectionDVD Mini Hifi System ControlsControls on the system and remote control Control by pressing one Operating the System Volume Control Dim modePersonal Setting Sound ControlTo exit without storing the setting, press Ç To switch off DBBAutomatic DSC-DBB / VEC-DBB selection DVD-Video DVD-VIDEOVideo CD Audio CDMultichannel sound Setting up the Multichannel systemSpeaker Connection TerminalsPositioning the Speakers Switching Surround Control SoundOn Screen Display information Display indications Menu bar/Status windowNTSC/PAL Setting Turning On the powerInitial Setup OSD Menu Personal preferencesAudio Access Control Night ModeVideo shift Digital outputAuthorising discs Access control Parental control DVD-Video onlyInsert the disc. See ‘Loading disc’ Deauthorising discsPlaying a DVD Loading discsPlaying a VCD General featuresPlaying a disc Moving to another title/TRACKVideo-CDs Repeat track/disc DVD-Video Discs Repeat chapter/ title/discDVDs VCDsSpecial DVD-features Special VCD-Features When PBC OFFPlaying an audio CD Channel settings Not available for all versions Mode Selection lKaraoke ON/OFF Echo -/+ jCD Direct Play Discs for playbackLoading the CD Changer Playing a CDSelecting a desired track Disc ChangeProgramming Tracks Reviewing the programmeErasing the programme when Tuning to radio stations Storing Preset StationsTuner Automatic programmingChanging the MW tuning grid Tuning to Preset Radio StationsNot available for version /30 For MW band To change from 9 kHz to 10 kHz or vice versaThere are two Auxiliary modes Normal AUX mode Clock SettingPress CLOCK/TIMER to select clock mode AUX/CDRTimer Timer SettingTo switch off the Timer Specifications SpecificationsSubject to modification Troubleshooting MaintenanceMaintenance DVD-Video Player OperationCD Player Operation Radio ReceptionGeneral

FW-D1 specifications

The Philips FW-D1 is a versatile and feature-rich home audio system that delivers a robust listening experience. This all-in-one unit is designed for both budding audiophiles and casual listeners, providing a range of functionalities that cater to various musical preferences.

At the heart of the FW-D1 is its powerful stereo sound system, which creates an immersive audio experience. With a total power output that is impressive for a compact unit, the system is capable of filling a room with clear, dynamic sound. The speakers are designed to deliver a balanced audio profile, offering deep bass and crisp highs, making it ideal for various genres of music.

One of the standout features of the Philips FW-D1 is its Bluetooth connectivity. This allows users to easily stream music from their smartphones, tablets, or laptops without the need for messy wires. Additionally, it supports a range of audio formats, ensuring compatibility with different media sources. The inclusion of a USB port further enhances its versatility, allowing users to play music directly from USB flash drives.

The FW-D1 comes equipped with a built-in CD player, catering to those who still enjoy the traditional format. This feature allows users to enjoy their favorite CDs with high-quality playback. The system also supports FM radio, offering a wide selection of local radio channels for users who prefer live broadcasts.

The user-friendly interface includes a clear LCD display, making it easy to navigate through various functions and settings. It features intuitive controls for volume adjustment, track selection, and input source, ensuring a hassle-free experience for users of all ages.

In terms of design, the Philips FW-D1 boasts a sleek and modern aesthetic. Its compact size makes it easy to integrate into any living space, whether in a small apartment or a larger home. The build quality reflects Philips' commitment to durability and longevity, ensuring that this audio system will serve users well for years to come.

Overall, the Philips FW-D1 offers an array of features, including Bluetooth connectivity, a CD player, FM radio, and a user-friendly interface. With its powerful sound output and sleek design, it stands out as an excellent choice for anyone looking to enhance their home audio experience. Whether hosting a gathering or enjoying a quiet evening, the FW-D1 provides the versatility and performance needed to meet various listening needs.
Top Page Image Contents