Samsung SSC21WEB manual Pip- Key, Zoom, Eng-23

SSC21WEB-1 2004.8.25 5:38 PM Page 23

2-8) PIP- KEY

Can be used to see the main screen while Single screen is displayed. The main screen can be changed and transfered to another channel while PIP is working. Please refer to "CHAPTER 4. DISPLAY MODE SETTING" for PIP function and details.

2-9) FREEZE- KEY

This key allows users to see a target camera picture at PAUSE MODE. If users select the camera with the œENTER √ KEY, and press the FREEZE BUTTON, the OSD “F” will be displayed on pause picture from the camera. Other FRONT KEY input is ignored at FREEZE MODE, and other FRONT KEY inputs will be available only after the FREEZE MODE is cancelled.

2-10) SEQUENCE- KEY

It makes a picture switch sequentially. This means that display the picture will be displayed during the DWELL TIME pre-set at the DWELL MENU of SETUP MENU, and switch the picture automatically as a pre-set sequence. Please refer to Chapter 3. DWELL TIME MENU function and setting method for details of DWELL TIME setting.

2-11) ZOOM-	KEY
It zooms a part of a picture doubling it in the display. If the ZOOM BUTTON is pressed, zoom area
will be displayed. Users can move to a target area by turning œENTER			√ SWITCH left and right at
this time. If œENTER		√ SWITCH is pressed at the target area, the area will be displayed with 2 times
larger.
2-12) POWER-	KEY

It turns ON/OFF the power of the monitor and camera at the same time.

In case the monitor power is ON, LED of monitor front is lit.

Eng-23