SSC21WEB-1 2004.8.25 5:38 PM Page 30
3-7) NETWORK SETTING function and setting method
•Function: Allows users to select the STATIC (fixed) IP, DHCP, PPPoE of Setting.
• Setting method: Move to #7, NETWORK SETUP MENU by using œENTER √ SWITCH at
SETUP MENU, then press the ENTER SWITCH to display the OSD as shown in the figure below. (The figure shows the initial setting status)
06/01/03 |
| 13:14:00 |
NETWORK SETTING |
| |
1. NETWORK ACCESS | STATIC.../DHCP.../PPPoE... | |
2. HTTP PORT | 00080 | |
NETWORK STATUS |
| |
IP | ADDR | 192.168.1.200 |
GATEWAY | 192.168.1.65 | |
SUBNETMASK | 255.255.255.0 | |
DNS 1 |
| 168.126.63.001 |
DNS 2 |
| 168.126.63.002 |
MAC ADDR | 00:30:6f:ff:00:00 | |
|
|
|
MOVE TO EACH item by using œENTER | √ switch, and change the set value. |
Static IP User |
|
- Constituted by Static IP on the TCP/IP network | |
1) Move to ‘STATIC...’ by using œENTER | √ at NETWORK ACCESS, then press ENTER SWITCH |
to set STATIC... |
|
(STATIC : Select in case the network configuration of SSC21WEB is fixed IP (Public or Private IP)
06/01/03 |
| 13:14:00 |
STATIC ACCESS |
| |
IP | ADDR | 192.168.1.200 |
GATEWAY | 192.168.1.65 | |
SUBNETMASK | 255.255.255.0 | |
DNS 1 |
| 168.126.63.001 |
DNS 2 |
| 168.126.63.002 |
|
|
|
2) Move to IP ADDR / GATEWAY / SUBNETMASK by using œENTER | √. |
3)Press ENTER SWITCH and type in IP ADDR / GATEWAY / SUBNETMASK respectively.
4)DNS 1 and DNS 2 will be automatically set to DNS as shown below. Use œENTER √ switch to change it.