Samsung SSC21WEB manual DATE/TIME Menu Function setting, Dwell Time Menu function setting, Eng-26

SSC21WEB-1 2004.8.25 5:38 PM Page 26

3-2) DATE/TIME MENU Function setting

•Function: Sets the display date format and current time.

• Setting method:			Move to #2. DATE/TIME MENU by using œENTER		√ SWITCH at setup menu,
then press the ENTER SWITCH to display the OSD as shown in the below figure. (The figure
shows the initial setting status.)
	06/01/03		13:14:00
		DATE/TIME SETTING
		DATE TYPE		MM/DD/YY
		DATE	06 / 01 / 03
		TIME [HH:MM:SS]	13 : 14 : 00

• Setting method of date display format

Move to the format item by turning œENTER √ SWITCH, and enter the mode for setting date format by pressing the ENTER SWITCH.

At this time, select a target date format by turning left and right the SWITCH. (“YY/MM/DD”, “MM/DD/YY”, “DD/MM/YY” are available for selectable data format.)

• Date and current time setting method

Repeat the above instruction for moving to each item (MONTH, DAY, YEAR, HOUR, MINUTE, SECOND) and entering the mode. Current date and time to display can be set. (It can be referred when ALARM or LOSS occurs.)

3-3) DWELL TIME MENU function setting

•Function: Displays each picture for pre-set time and automatically switches it to the next picture

at SEQUENTIAL DISPLAY MODE.

• Setting method: Move to #3. DWELL TIME menu by using œENTER √ SWITCH at SETUP MENU, and press the ENTER SWITCH to display the following OSD as shown in the below figure. (The figure shows the initial setting status.)

06/01/03		13:14:00
	DWELL TIME SETTING
	CAM1	03 SEC
	CAM2	03 SEC
	CAM3	03 SEC
	CAM4	03 SEC
	CAM5	03 SEC
	CAM6	03 SEC
	CAM7	03 SEC
	CAM8	03 SEC
	QUAD-A	03 SEC
	QUAD-B	03 SEC

Eng-26