Samsung SSC21WEB manual Display Menu function setting, Eng-27

SSC21WEB-1 2004.8.25 5:38 PM Page 27

If the time is set for each camera channel by using œENTER √ SWITCH, each camera picture will be

displayed for the set time and switched to the next picture automatically.

3-4) DISPLAY MENU function setting

•Function: Allows users to select the color and ON/OFF of borderline at QUAD DISPLAY.

• Setting method: Move to #4. DISPLAY SETTING MENU by using œENTER √ SWITCH at

SETUP MENU, then press the ENTER SWITCH to display the OSD as shown in the figure below. (The figure shows the initial setting status.)

06/01/03		13:14:00
	DISPLAY SETTING
	BORDER	ON
	BORDER COLOR	GRAY
	PIP POSITION	B-RIGHT
	NETWORK STATUS	ON/OFF

Move to each item by using œENTER √ SWITCH, and change the set value.

1)BORDER item determines whether or not boarder line is displayed at QUAD DISPLAY MODE. (ON: Displays the boarder line, OFF: Does not display the boarder line)

2)BORDER COLOR item sets boarder line color among three colors: Black, White, Gray.

3)PIP POSITION item sets the location of sub picture at PIP DISPLAY. (T-LEFT: Upper part of left

side, T-RIGHT: Upper part of right side, B-LEFT: Lower part of left side, B-RIGHT: Lower part of right side)

4)NETWORK STATUS determines the display of [S], [D], [P] displayed at the left of top on the screen according to status of NETWORK.

Refer to 3-7) NETWORK SETTING function and setting method for the respective detailed status.

(ON: Displays the NETWORK STATUS, OFF: Does not display the NETWORK STATUS)

Eng-27