Chapter 4. Setting the DIP Switches
CAUTION
Turn off the printer while setting the DIP switch to prevent an electrical short, which can damage the printer.
You can change your interface and printer density settings by changing the DIP switch setting.
1.Make sure the printer is turned off.
2.There are a switch. Notice that ON is marked on each set of switches. Use tweezers or another narrow tool to move the switches.
1
3. Use the following tables to set the DIP switches.
DIP switch functions
No. |
| Dip Switch |
|
| ||
Level | BPS |
| D/W1 | D/W2 | S/W3 | |
|
| |||||
1 | 1 | 2400 |
| ON | OFF | OFF |
2 | 4800 |
| OFF | ON | OFF | |
|
| |||||
2 | 3 | 9600 |
| OFF | OFF | ON |
4 | 19200 |
| ON | OFF | ON | |
|
| |||||
3 | 5 | 38400 |
| ON | ON | OFF |
6 | 57600 |
| OFF | ON | ON | |
|
| |||||
| 7 | 115200 |
| ON | ON | ON |
4 | Function | ON |
| OFF |
| |
Density | Dark |
| Normal |
| ||
|
|
| ||||
5 | Handshaking | Xon/Xoff |
| DTR/DSR |
| |
6 | Reserved | - |
|
| - |
|
7 | Language | Engish |
| Korean |
| |
8 | Reserved | - |
|
| - |
|
NOTE
Dip Switch 7 must be always set to ON condition.
1112