Samsung STP-102S, STP-102P instruction manual ESC J n, ESC R n, ESC V n, ESC \ nL nH, ESC a n

ESC J n

[Name]	Print and feed paper.			n
[Format]	ASCII	ESC	J
	Hex	1B	4A	n
	Decimal	27	74	n
[Range]	0 < n < 255
[Description]	Prints the data in the print buffer and feeds the paper n dots.

ESC R n

[Name]	Select an international character set.
[Format]	ASCII	ESC	R	n
	Hex	1B	52	n
	Decimal	27	82	n
[Range]	0 < n < 10

[Description]			Selects an international character set n from the following table.
		n		Character set	n	Character set
	0			U.S.A.	5	Sweden
		1		France	6	Italy
	2			Germany	7	Spain
	3			U.K.	9	Norway
	4			Denmark I	10	Denmark
							II

ESC V n

ESC \ nL nH

[Name]	Set relative print position.
[Format]	ASCII		ESC	\	1n, nH
	Hex		1B	5C	1n, nH
	Decimal		27	92	1n, nH
[Range]	0	< nL < 255
	0	< nH < 32

[Description]	Set the print starting position based on the current position by
	using the horizontal or vertical motion unit.
[Notes]	This command sets the distance from the current position to (nL + nH x 256) dots.
	Any setting that exceeds the printable area is ignored.

ESC a n

[Name]			Select justification.
[Format]			ASCII	ESC	a	n
			Hex	1B	61	n
			Decimal	27	97	n
[Range]			0 < n < 2, 48 < n < 50
[Description]			Aligns all the data in one line to the specified position.
			n selects the type of justification as follows:
		n		Justification
	0, 48			Left justification
		1, 49		Centering

[Name]

[Format]

[Range]

[Description]

ESC	V	n
1B	56	n
27	86	n

2, 50	Right justification
[Notes]	The command is enabled only when input at the beginning of the line.
	Lines are justified within the specified printing area.
[Default]	Spaces set by HT, ESC $, and ESC \ are all justified.
	n = 0
[Example]	Left justification	Centering	Right justification

	n	Function
0, 48
	1, 49
[Notes]		When underline mode is turned on, the printer does not underline 90
		clockwise-rotated characters.
		Double-width and double-height commands in 90 rotation mode enlarge
		characters in the opposite directions as from double-height and double-width
		commands in normal mode.
		These command has no effect in page mode.
		If this command is input in page mode, the printer performs only internal flag
		operations.

27

ABC	ABC	ABC
ABCD	ABCD	ABCD
ABCDE	ABCDE	ABCDE

28