Samsung ML-D2850B, ML-D2850A, ML-S2850A manual Loading paper

Page 22

Type

 

 

Guidelines

 

 

 

Transparencies

To avoid damaging the printer, use only

 

 

transparencies designed for use in laser

 

 

printers.

 

• Transparencies used in the printer must be able

 

 

to withstand the machine’s fusing temperature.

 

 

Check your machine’s specification to view the

 

 

fusing temperature, see page 11.1.

 

Place them on a flat surface after removing

 

 

them from the printer.

 

Do not leave them in the paper tray for long

 

 

periods of time. Dust and dirt may accumulate

 

 

on them, resulting in spotty printing.

 

To avoid smudging caused by fingerprints,

 

 

handle them carefully.

 

To avoid fading, do not expose printed

 

 

transparencies to prolonged sunlight.

 

Ensure that transparencies are not wrinkled,

 

 

curled, or have any torn edges.

 

 

 

Labels

To avoid damaging the printer, use only labels

 

 

designed for use in laser printers.

 

When selecting labels, consider the following

 

 

factors:

 

 

-

Adhesives: The adhesive material should be

 

 

 

stable at 180° C (356° F), the printer’s fusing

 

 

 

temperature.

 

 

-

Arrangement: Only use labels with no

 

 

 

exposed backing between them. Labels can

 

 

 

peel off sheets that have spaces between the

 

 

 

labels, causing serious jams.

 

 

-

Curl: Prior to printing, labels must lie flat with

 

 

 

no more than 13 mm (5 inches) of curl in any

 

 

 

direction.

 

 

-

Condition: Do not use labels with wrinkles,

 

 

 

bubbles, or other indications of separation.

 

Make sure that there is no exposed adhesive

 

 

material between labels. Exposed areas can

 

 

cause labels to peel off during printing, which

 

 

can cause paper jams. Exposed adhesive can

 

 

also cause damage to printer components.

 

Do not run a sheet of labels through the printer

 

 

more than once. The adhesive backing is

 

 

designed for only a single pass through the

 

 

printer.

 

Do not use labels that are separating from the

 

 

backing sheet or are wrinkled, bubbled, or

 

 

otherwise damaged.

 

 

 

Card stock or

Do not print on print media smaller than 76 mm

custom-sized

 

(3 inches) wide or 127 mm (5 inches) long.

materials

In the software application, set margins at least

 

 

6.4 mm (0.25 inches) away from the edges of

 

 

the material.

 

 

 

 

Type

 

Guidelines

 

 

 

Preprinted

Letterhead must be printed with heat-resistant

paper

 

ink that will not melt, vaporize, or release

 

 

hazardous emissions when subjected to the

 

 

printer’s fusing temperature for 0.1 second.

 

 

Check your machine’s specification to view the

 

 

fusing temperature, see page 11.1.

 

Letterhead ink must be non-flammable and

 

 

should not adversely affect printer rollers.

 

Forms and letterhead should be sealed in a

 

 

moisture-proof wrapping to prevent changes

 

 

during storage.

 

Before you load preprinted paper, such as

 

 

forms and letterhead, verify that the ink on the

 

 

paper is dry. During the fusing process, wet ink

 

 

can come off preprinted paper, reducing print

 

 

quality.

 

 

 

Loading paper

Load the print media you use for the majority of your print jobs in the tray 1. The tray 1 can hold a maximum of 250 sheets of 20 lb plain paper.

You can purchase an optional tray (tray 2) and attach it below the standard tray to load an additional 250 sheets of paper. For order information for an optional tray, see 7.1.

The paper level indicator on the front of the tray 1 and the optional tray 2 shows the amount of paper currently left in the tray. When the tray is empty, the indicator of the bar is completely lowered.

Full ▲

▲ Empty

4.4 <Loading print media>

Image 22
Contents Page Page Contact Samsung World Wide South Africa Contents Installing accessories MaintenanceTroubleshooting SpecificationsEnvironmental and Safety Consideration Safety and Regulatory InformationImportant Precautions and Safety Information Laser Safety StatementRecycling Ozone SafetyPower Saver Radio Frequency EmissionsCanadian Radio Interference Regulations Declaration of Conformity European CountriesReplacing the Fitted Plug for UK Only Approvals and CertificationsSpecial features IntroductionPrinter overview Features ML-2850D ML-2851NDFront view Rear view Control panel overviewUnderstanding the LEDs Status DescriptionSetting up the hardware Finding more informationAltitude adjustment Click Printer SettingChanging the font setting Click Printer Setting Click EmulationPrinting a demo Using toner save mode Basic setupUsing toner save mode Printing a demoSoftware overview Printer driver featuresSupplied software Linux System requirementsWindows MacintoshLoading print media Selecting print mediaType Size Dimensions Weighta Capacityb Supported sizes of paperGuidelines for special print media Guidelines for selecting and storing print mediaType Guidelines Loading paper Using the tray 1 or the optional tray Changing the size of the paper in the trayUsing manual feeder Load the paper with the side to be printed on facing upSlovakia Printing with a prescribed paper sizeKnowing an output location CzechSupported operating systems Using SetIP programDouble click Application SetIP Basic printing Canceling a print jobPrinting a document Canceling a print job Printing a documentHow to purchase Ordering supplies and accessoriesAccessory Toner cartridgeCleaning the outside of the printer MaintenanceCleaning the printer Cleaning the inside of the printerMaintaining the toner cartridge Redistributing toner cartridgeReplacing the toner cartridge Toner cartridge has reached its estimated cartridge lifeMaintenance parts Printing a configurationItems Yield Average Paper feed area TroubleshootingClearing paper jams TrayAround the toner cartridge Manual trayDuplex unit area Paper exit areaDuplex jam Tips for avoiding paper jams Troubleshooting checklist Solving general printing problemsDpi Best, change it to Dpi Normal. SeeSolving print quality problems Background Condition Suggested solutions Vertical linesGray Toner smearCommon Windows problems Common PostScript problems Common Linux problemsCommon Macintosh problems Installing a memory module Installing accessoriesPrecautions to take when installing accessories Disconnect the power cordActivating the added memory in the PS printer properties Select Device SettingsSelect the Samsung ML-2850 Series PS printer Printer specifications SpecificationsSpecifications and description Index Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Typical Installation Installing Printer SoftwareInstalling Software for Local Printing Select Typical installation for a local printer. Click NextCustom Installation Select Custom installation. Click Next Select the components to be installed and click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Select the components you want to reinstall and click NextRemoving Printer Software NextPrinting a Document Select your printer driver from the Name drop-down listPrinting to a file PRN Printer SettingsSelect Printers and Faxes Select your printer driver icon Paper Tab Layout TabPaper Orientation Source Image ModeGraphics Tab Scaling PrintingWatermark Extras TabAdvanced Options OverlayAbout Tab Using a Favorite SettingUsing Help Printer TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsFitting Your Document to a Selected Paper Size Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document NoneCreating a Watermark Using WatermarksUsing an Existing Watermark Editing a WatermarkUsing a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page OverlayUsing Windows PostScript Driver AdvancedCheck the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Double-clickPrinters and FaxesUnderstanding Smart Panel Troubleshooting GuidePrinter Setting Toner LevelChanging the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Uninstalling the Unified Linux Driver Click UninstallOpening the Unified Driver Configurator Using the Unified Driver ConfiguratorPrinters Configuration Double-clickUnified Driver Configurator on the desktopPorts Configuration Configuring Printer PropertiesClasses Tab Printing from Applications Printing FilesUninstalling the printer driver Installing SoftwareInstalling the printer driver Printer driverFor a USB-connected Setting Up the PrinterFor a Network-connected Mac OS 8.6 ~Printing a Document Changing Printer SettingsPrinting LayoutGraphics Printer FeaturesPaper Printing Multiple Pages on One Sheet of Paper Duplex PrintingIndex Favorites 17 image mode 15 resolution Rev.10.00

ML-D2850B, ML-D2850A, ML-S2850A specifications

The Samsung ML-S2850A, ML-D2850A, and ML-D2850B are high-performance toner cartridges designed to work seamlessly with Samsung's range of printers. These cartridges are instrumental in delivering crisp, vibrant prints that maintain the quality and reliability that professionals and businesses expect.

The ML-S2850A is a standard toner cartridge that provides exceptional print quality, delivering sharp text and clear images. It is designed for maximum efficiency, featuring an estimated page yield of up to 3,000 pages, making it suitable for moderate printing needs. The advanced toner technology used in this cartridge ensures that prints are produced quickly without sacrificing quality.

In contrast, the ML-D2850A and ML-D2850B cartridges offer high-yield options for users with more extensive printing requirements. The ML-D2850A cartridge also provides an impressive page yield of approximately 5,000 pages, while the ML-D2850B goes even further with an estimated yield of up to 10,000 pages. This makes the ML-D2850A and ML-D2850B ideal for businesses or individuals who require consistent and reliable printing without frequent interruptions for replacement.

One of the key characteristics of these cartridges is Samsung’s advanced polymerized toner technology, which enables finer toner particles. This results in more precise and vivid prints, enhancing the overall quality of the outputs. Additionally, the cartridges are designed with easy installation in mind, ensuring that users can replace them without hassle, which minimizes downtime.

Furthermore, these cartridges come equipped with smart technology features that help to monitor toner levels, providing alerts when it is time to replace them. This proactive approach to toner management prevents unexpected outages and helps streamline printing operations, particularly in busy office environments.

The environmental aspect of these toner cartridges is also noteworthy. Samsung is committed to sustainability, and these toner cartridges are designed with recyclable materials, aligning with eco-friendly initiatives.

In summary, the Samsung ML-S2850A, ML-D2850A, and ML-D2850B toner cartridges offer a combination of high yield, exceptional print quality, and user-friendly features. They cater to varying printing needs, ensuring that both individuals and businesses can find a suitable option. The advanced technology and design not only enhance the printing experience but also contribute to sustainable printing practices.