Samsung ML-4551ND, ML-4550 manual Loading paper

Page 33

Media type

 

 

Guidelines

 

 

 

Transparencies

To avoid damaging the printer, use only

 

 

transparencies designed for use in laser

 

 

printers.

 

• Transparencies used in the printer must be able

 

 

to withstand 195° C (383° F), the printer’s

 

 

fusing temperature.

 

Place them on a flat surface after removing

 

 

them from the printer.

 

Do not leave them in the paper tray for long

 

 

periods of time. Dust and dirt may accumulate

 

 

on them, resulting in spotty printing.

 

To avoid smudging caused by fingerprints,

 

 

handle them carefully.

 

To avoid fading, do not expose printed

 

 

transparencies to prolonged sunlight.

 

Ensure that transparencies are not wrinkled,

 

 

curled, or have any torn edges.

 

 

 

Labels

To avoid damaging the printer, use only labels

 

 

designed for use in laser printers.

 

When selecting labels, consider the following

 

 

factors:

 

 

-

Adhesives: The adhesive material should be

 

 

 

stable at 195° C (383° F), the printer’s fusing

 

 

 

temperature.

 

 

-

Arrangement: Only use labels with no

 

 

 

exposed backing between them. Labels can

 

 

 

peel off sheets that have spaces between the

 

 

 

labels, causing serious jams.

 

 

- Curl: Prior to printing, labels must lie flat with

 

 

 

no more than 13 mm (5 inches) of curl in any

 

 

 

direction.

 

 

-

Condition: Do not use labels with wrinkles,

 

 

 

bubbles, or other indications of separation.

 

Make sure that there is no exposed adhesive

 

 

material between labels. Exposed areas can

 

 

cause labels to peel off during printing, which

 

 

can cause paper jams. Exposed adhesive can

 

 

also cause damage to printer components.

 

Do not run a sheet of labels through the printer

 

 

more than once. The adhesive backing is

 

 

designed for only a single pass through the

 

 

printer.

 

Do not use labels that are separating from the

 

 

backing sheet or are wrinkled, bubbled, or

 

 

otherwise damaged.

 

 

 

Card stock or

Do not print on media smaller than 76 mm

custom-sized

 

(3 inches) wide or 127 mm (5 inches) long.

materials

In the software application, set margins at least

 

 

6.4 mm (0.25 inches) away from the edges of

 

 

the material.

 

 

 

 

Media type

 

Guidelines

 

 

 

Preprinted

Letterhead must be printed with heat-resistant

paper

 

ink that will not melt, vaporize, or release

 

 

hazardous emissions when subjected to the

 

 

printer’s fusing temperature of 195° C (383° F)

 

 

for 0.1 second.

 

Letterhead ink must be non-flammable and

 

 

should not adversely affect printer rollers.

 

Forms and letterhead should be sealed in a

 

 

moisture-proof wrapping to prevent changes

 

 

during storage.

 

Before you load preprinted paper, such as

 

 

forms and letterhead, verify that the ink on the

 

 

paper is dry. During the fusing process, wet ink

 

 

can come off preprinted paper, reducing print

 

 

quality.

 

 

 

Loading paper

Load the print media you use for the majority of your print jobs in the tray

1.The tray 1 can hold a maximum of 500 sheets of 75 g/m2 (20 lb) plain paper.

You can purchase optional trays and attach them below the standard tray to load an additional 500 sheets of paper for each tray. You can attach up to three additional trays. For order information for optional trays, see page 7.1.

The paper level indicator on the front of the tray 1 and the optional trays shows the amount of paper currently left in the tray. When the tray is empty, the indicator of the bar is completely lowered.

FullEmpty

5.4 <Loading print media>

Image 33
Contents Page Page Contact Samsung worldwide Switzerland Contents Troubleshooting Installing accessoriesSpecifications Important Precautions and Safety Information FCC Regulations Canadian Radio Interference RegulationsReplacing the Fitted Plug for UK Only Openssl License Original Ssleay License Special features IntroductionSoftware Section You can print in Windows 98/Me/NT 4.0/2000/XP/2003 Features ML-4550 ML-4551N ML-4551NDFront view Printer overviewControl panel overview Finding more informationClearance space Selecting a locationSystem setup Using control panel menusAccessing control panel menus Menu overview Job manager menuInformation menu Orientation Layout menuSimplex MarginGraphic menu Paper menuSystem Setup menu PostScript Emulation menuNetwork menu Changing the font setting Using toner save modePrinting a demo Changing the display languageSupplied software Software overviewPrinter driver features System requirementsWindows Linux MacintoshRequirements Network setup Via network administration programsVia the control panel Configuring EtherTalk Configuring TCP/IPDynamic addressing BOOTP/DHCP Supported operating systemsSetting Ethernet speed Configuring IPX frame typesRestoring the network configuration Printing a network configurationSelecting print media Loading print mediaType Size Weight Type Size Dimensions Weighta CapacitybSupported sizes of paper Print media for duplex printingGuidelines for selecting and storing print media Guidelines for special print mediaMedia type Guidelines Loading paper Changing the size of the paper in the tray Using the standard tray or the optional traysLoad the paper with the side to be printed on facing up Using the multi-purpose trayTips on using the multi-purpose tray Using manual feed modeSelecting an output location Printing to the output tray Face downPrinting to the rear cover Face up Printing a document Canceling a print job Canceling a print jobBasic printing Printing a documentAccessories Ordering supplies and accessoriesHow to purchase Toner cartridgesCleaning the printer MaintenanceCleaning the outside of the printer Cleaning the inside of the printerMaintenance Maintaining the toner cartridge Printing a cleaning sheetToner cartridge storage Expected cartridge yieldRedistributing toner cartridge Checking the remaining tonerReplacing the toner cartridge Maintenance Maintenance parts Clearing the Toner Low Replace Toner messageItems Yield Average Clearing paper jams TroubleshootingPaper feed area TrayOptional tray Multi-purpose tray Around the toner cartridgePaper exit area Duplex unit areaDuplex jam Troubleshooting checklist Condition Suggested solutionsTips for avoiding paper jams Understanding display messages Understanding the status LEDLow Heat Error Message Meaning Suggested solutions LoadLSU Motor Error OPC is CleaningToner cartridge-related messages Solving general printing problems Spool Settings button Settings and Printers. RightClick the Samsung ML-4550 Series PCL 6 printer iconSolving print quality problems Condition Suggested solutions Curl or wave Condition Suggested solutions VerticalRepetitive DefectsCommon PostScript problems Common Windows problemsCommon Macintosh problems Common Linux problemsInstallable Options section to InstalledPrecautions when installing accessories Installing accessoriesInstalling a dual in-line memory module Dimm Disconnect the power cordSelect the Samsung ML-4550 Series PS printer Setting the memory in the PostScript printer propertiesRemoving a Dimm Installing a network interface cardInstalling the hard disk Using the hard diskSetting the hard disk in the printer properties Printing with the optional hard disk Setting the time and dateStoring a job Printing a stored jobControlling the active job queue Printing using the form filesTo delete a file from the queue To promote a file from the queueSpecifications Printer specificationsSpecifications and Description ECP Index System requirements Linux 3.3 Macintosh 3.3 Windows Software section Contents Using Windows Postscript Driver Using Your Printer in Linux Installing Software for Local Printing Installing Printer SoftwareTypical Installation Select Typical installation for a local printer. Click NextCustom Installation Select the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Changing the Software Language Reinstalling Printer SoftwareNext Removing Printer SoftwareSelect your printer driver from the Name drop-down list Printing a DocumentPrinter Settings Layout TabPaper Orientation Paper Tab SourceScaling Printing Toner Save Mode ResolutionGraphics Tab Advanced OptionsJob Setting On the Job SettingExtras Tab Using Help Using a Favorite SettingAbout Tab Printer TabPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersPrinting a Reduced or Enlarged Document Printing on Both Sides of PaperFitting Your Document to a Selected Paper Size NoneUsing an Existing Watermark Using WatermarksCreating a Watermark Editing a WatermarkWhat is an Overlay? Using OverlaysUsing a Page Overlay Creating a New Page OverlayAdvanced Using Windows PostScript DriverUsing the right-click menu Using the shortcut iconOverview Direct Print Utility PrintingSetting Up a Client Computer Setting Up a Host ComputerCheck the Share this printer box Select Local Port and click New PortPrinter Setting Troubleshooting GuideUnderstanding Smart Panel Toner LevelChanging the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Click Uninstall Uninstalling the Unified Linux DriverPrinters Configuration Using the Unified Driver ConfiguratorOpening the Unified Driver Configurator Double-clickUnified Driver Configurator on the desktopConfiguring Printer Properties Ports ConfigurationClasses Tab Printing from Applications Printing FilesFile menu Click Continue Installing Software for MacintoshFor a Network-connected Macintosh Setting Up the PrinterFor a USB-connected Macintosh Mac OS 8.6 ~Changing Printer Settings Layout SettingPrinting a Document ResolutionQuality Printer Features SettingPrinting Multiple Pages on One Sheet of Paper Reverse DuplexDuplex Printing Index Resolution Macintosh 36 Windows GGGGGGGGGGGGGRev
Related manuals
Manual 34 pages 32.16 Kb

ML-4550, ML-4551ND specifications

The Samsung ML-4551ND and ML-4550 are monochrome laser printers designed for efficient and high-quality printing in office environments. Known for their reliability and performance, these models cater to small to medium-sized businesses that require consistent output without compromising on quality.

One of the standout features of the ML-4551ND is its impressive print speed. Capable of delivering up to 45 pages per minute, this printer ensures that large print jobs are completed swiftly, optimizing workflow and productivity. The ML-4550, while slightly slower, still delivers a robust print speed of up to 40 pages per minute. Both printers can handle complex documents with ease, making them suitable for a variety of professional applications.

In terms of print resolution, the ML-4551ND and ML-4550 offer sharp and clear outputs with a maximum resolution of 1200 x 1200 dpi. This high-quality printing is ideal for producing text documents, presentations, and graphics with fine details. Additionally, Samsung's proprietary image processing technology enhances print quality and clarity, ensuring that every document meets professional standards.

The ML-4551ND and ML-4550 also feature a generous paper handling capacity, with a standard input tray that can hold up to 250 sheets of paper. For businesses with higher volume printing needs, the optional additional tray allows for an increase in capacity. Both models support various media types, including labels, envelopes, and card stock, adding versatility to meet diverse printing requirements.

Connectivity is another strong feature of the ML-4551ND and ML-4550. Equipped with USB and parallel ports, these printers can easily integrate into existing office networks. The ML-4551ND additionally provides built-in Ethernet networking capabilities, which allow multiple users to share the printer across a network, enhancing accessibility and convenience for teams.

Energy efficiency is also a key consideration with these models. The ML-4551ND and ML-4550 are designed with Eco Mode, which helps reduce toner and energy consumption during operation. This thoughtful design element not only supports sustainability efforts but also contributes to lower operating costs.

In summary, the Samsung ML-4551ND and ML-4550 are reliable and effective monochrome laser printers that provide businesses with high-speed printing, exceptional print quality, and flexible connectivity options. Their robust features and energy-efficient technologies make them a solid choice for organizations looking to enhance their printing capabilities while keeping costs under control.