5.Enter the machine’s new information into the configuration window as follows:
•MAC Address : Find the machine’s MAC address from the Network Configuration Report and enter it without the colons.
For example, 00:15:99:29:51:A8 becomes 0015992951A8.
MAC address is a hardware serial number of the machine’s network interface and can be found in on the Network Configuration Report.
•IP Address: Enter a new IP address for your printer the same as the computer’s IP address except for the last number.
For example, if your computer’s IP address is 192.168.1.150, enter 192.168.1.X. (X is number between 1 and 254 other than the computer’s address.)
•Subnet Mask: Enter this exactly the same as the computer’s Subnet Mask.
•Default Gateway: Enter this exactly the same as the computer’s Default Gateway.
6.Click Apply, and then click OK. The machine will automatically print the Configuration report. Confirm that all the settings are correct.
7.Click Exit to close the SetIP program.
8.If necessary, restart the computer’s firewall.
Network parameter setting
You can also set up the various network settings through the network administration programs.
•SyncThru™ Web Admin Service:
•SyncThru™ Web Service: Web server embedded on your network print
server, which allows you to: (A) Configure the network parameters necessary for the machine to connect to various network environments.
(B) Customize machine settings.
Installing the driver software
You must install the printer driver software for printing. The software includes drivers, applications, and other user friendly programs.
The following procedure is based on Windows XP. The procedure and popup window which appears during the installation may differ depending on the operating system, machine features, or the interface in use.
Make sure that the network setup for your machine is completed. (See "Setting up the network" on page 21.) All applications should be closed on your computer before beginning the installation.
If your IP assignment method is DHCP and IP address can be changed whenever machine in turned on, we recommend you to use the Bonjour program. Go to the http://developer.apple.com/networking/bonjour/ download/, select the program Bonjour for Windows according to your computer operating system, and install the program. In case of Mac OS X, this program might be already installed in your PC. This program will allow you to fix the network parameter automatically. This Bonjour program does not support Linux.
If your IP assignment method is static, follow the steps below.
1.Insert the Printer Software
2.Click Next.
•If the installation window does not appear, click Start > Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
•If you use Windows Vista, Windows 7 and Windows Server 2008 R2, click Start > All Programs > Accessories > Run, and type X:\Setup.exe.
• The installation window may slightly differ, if you are reinstalling the driver.
•View User’s Guide: Allows you to view the User’s Guide. If your computer does not have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you.
3.Select Typical installation for a network printer, and then click Next.
4.The list of machines available on the network appears. Select the printer you want to install from the list and then click Next.
• If you do not see your machine on the list, click Update to refresh the list, or select Add TCP/IP Port to add your machine to the network. To add the machine to the network, enter the port name and the IP address for the machine.
•To verify your machine’s IP address or the MAC address, print a Network Configuration Report page.
5.After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung machines in order to receive information from Samsung. If you wish to do so, select the corresponding checkbox(es) and click Finish.
If your machine does not work properly after the installation, verify your network settings and try reinstalling the printer driver.
USING A WIRELESS NETWORK(WINDOWS/CLP- 310W, CLP-315W ONLY)
You must set up the network protocols on your machine to use it on your network. This chapter will show you how this is easily accomplished.
This section is applicable only for the Windows operating system.
Getting started_ 23