CHANGING THE SIZE OF THE PAPER IN THE PAPER TRAY
To load different sizes of paper, such as
To change the tray size to other size, you must adjust the paper length guide properly.
1 Tray extend lever
2 Paper length guide
3 Paper width guide
4 Paper cover
1.Pull the tray out of the machine. Open the paper cover and remove paper from the tray if necessary.
2.Pressing and unlatching the guide lock in the top of the tray, pull the tray out manually.
3.Load paper into the tray.
4.Slide the paper length guide until it lightly touches the end of the paper stack. Squeeze the paper width guide and slide it to the edge of the paper stack without causing it to bend.
For paper smaller than
If the paper that you need to print is shorter than length 222 mm (8.74 inches), press and unlatch the guide lock in the tray, push the tray in
34 _Selecting and loading print media