Samsung XL30 Do not use a damaged or loose plug, Use only a properly grounded plug and receptacle

Page 3

Do not use a damaged or loose plug.

zThis may cause electric shock or fire.

Do not pull the plug out by the wire nor touch the plug with wet hands.

zThis may cause electric shock or fire.

Use only a properly grounded plug and receptacle.

zAn improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

Insert the power plug firmly so that it does not come loose.

zA bad connection may cause fire.

Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.

zThis may cause electric shock or fire.

Do not connect too many extension cords or plugs to one outlet.

zThis may cause fire.

Do not disconnect the power cord while using the monitor.

zA surge may be caused by the separation and may damage the monitor.

Do not use the power cord when the connector or plug is dusty.

zIf the connector or plug of the power cord is dusty, clean it with a dry cloth.

zUsing the power cord with a dusty plug or connector may cause an electric shock or fire.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

Image 3
Contents SyncMaster XL30 Notational PowerUse only a properly grounded plug and receptacle Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Do not use a damaged or loose plugInstallation Do not drop the monitor when moving itDo not place the product on the floor Do not place the monitor face down CleanKeep any heating devices away from the power cable Put down the monitor carefullyOthers Do not spray water or detergent directly onto the monitorDo not remove the cover or back Do not install inside a vehicle Do not cover the vents on the monitor cabinetNever insert anything metallic into the monitor openings Page Good Postures When Using the Monitor Unpacking Monitor DriverCable Hood FrontMode button = Color Mode Adjust buttons RearScreen is getting dark Stand Stopper Kensington LockDown USB downstream port Connect the Down DVI-D Connecting the MonitorConnecting the Monitor Connecting USBUSB port of the monitor supports High-Speed Certified USB Changing the Stand and Installing the Hoods SlidingSwivel Removing the base Tilt angleAttaching a Base Page Check List SymptomSolutions Check ListControl Panel → Display → Settings QuestionAnswer Signal Cable ResolutionInput Signal, Terminated Power SupplyVesa Mounting Interface Power offNormal Power saving Power button59.972 268.5 Horizontal Frequency Preset Timing ModesHorizontal 59.91 VESA, 2560 xEurope Contact Samsung WorldwideNorth America Latin AmericaAsia Pacific CISTerms Middle East & AfricaFor Better Display AuthorityDisclaimer Wording for Adobe Software Products Europe Final Version 12TH September Suggestions for specific applications WarrantyWhat is Image retention ? Power Off, Screen Saver, or Power Save Mode
Related manuals
Manual 16 pages 62.1 Kb