Samsung XL30 manual

Page 8

Do not insert metal objects such as chopsticks, wire and tools or inflammable objects such as paper or matches into the vent, headphone port or AV ports or etc.

zThis may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center.

When viewing a fixed screen for an extended period of time, residual image or blurriness may appear.

zChange the mode to energy saving mode or set a screensaver to a changing picture when away from the monitor for an extended period of time.

Adjust the resolution and frequency to the levels appropriate for the model.

zAn inappropriate resolution may cause undesirable picture quality. 30 inch (75 cm) - 2560 x 1600

Viewing the monitor continuously at a too close angle may result in damage to your eyesight.

To ease eye strain, take at least a five-minute break after every hour of using the monitor.

Do not install the product on an unstable, uneven surface or a location prone to vibrations.

zDropping the product may cause damage to the product or the person carrying it. Using the product in a location prone to vibrations may shorten the lifetime of the product or may cause the product to catch fire.

When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected to other devices, are disconnected before moving the monitor.

zFailure to disconnect cables may damage it and cause fire or electric shock.

Place the product out of children's reach, as they could damage by hanging onto it.

zA falling product may cause injury to the person or even fatality.

When not using the product for an extended period of time, keep the product unplugged.

Image 8
Contents SyncMaster XL30 Power NotationalInsert the power plug firmly so that it does not come loose Do not disconnect the power cord while using the monitorDo not use a damaged or loose plug Use only a properly grounded plug and receptacleDo not place the product on the floor InstallationDo not drop the monitor when moving it Clean Keep any heating devices away from the power cablePut down the monitor carefully Do not place the monitor face downDo not remove the cover or back OthersDo not spray water or detergent directly onto the monitor Never insert anything metallic into the monitor openings Do not install inside a vehicleDo not cover the vents on the monitor cabinet Page Good Postures When Using the Monitor Cable UnpackingMonitor Driver Front HoodMode button = Color Mode Screen is getting dark Adjust buttonsRear Down USB downstream port Connect the Down Stand StopperKensington Lock Connecting the Monitor Connecting the MonitorConnecting USB DVI-DUSB port of the monitor supports High-Speed Certified USB Swivel Changing the Stand and Installing the HoodsSliding Tilt angle Removing the baseAttaching a Base Page Symptom SolutionsCheck List Check ListAnswer Control Panel → Display → SettingsQuestion Resolution Input Signal, TerminatedPower Supply Signal CablePower off Normal Power savingPower button Vesa Mounting InterfacePreset Timing Modes Horizontal59.91 VESA, 2560 x 59.972 268.5 Horizontal FrequencyContact Samsung Worldwide North AmericaLatin America EuropeCIS Asia PacificMiddle East & Africa TermsAuthority For Better DisplayDisclaimer Wording for Adobe Software Products Europe Final Version 12TH September Warranty What is Image retention ?Power Off, Screen Saver, or Power Save Mode Suggestions for specific applications
Related manuals
Manual 16 pages 62.1 Kb