|
|
|
|
|
|
| User’s Manual | 51 |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
Troubleshooting
Check List
Check the following items if there is trouble with the monitor.
1.Check if the power cord and the cable are properly connected to the computer.
2.Check if the computer beeps more than 3 times when booting.
(If it does, request an
3.If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.
4.Check if the scanning ratio of the video screen is set at 75Hz or 85Hz. (Do not exceed 60Hz when using the maximum resolution.)
5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel, System, Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.
Tips for Highlight Zone
The Highlight feature is designed for movig image and so please use it in the moving image screen.
1.To protect CDT against the screen brightness, the Highlight Zone function persists for three hours and then automatically stops. So please reset it to continue.
2.Once the Highlight Zone has been switched off, you can't select any of the other menus within the Hightlight Zone.
3.When the Highlight Zone function is operated, the surrounding brightness of screen may become dark.
4.Depending on the video card you use, a color saturation phenomenon may occur in the Highlight Zone. In this case, slightly lower the contrast of the Highlight Zone and the color saturation will be reduced.
Note: If problems repeatedly occur, contact an authorized service center.