|
|
|
|
|
|
| User’s Manual | 15 |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
Setup
Connecting Your Monitor
1.Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.
2.Connect the signal cable to the video port on your computer, video board, video card, or graphics card.
3.If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the pins on your adapter (Adapter not included). A
4.Connect the signal cable to the BNC signal port on the back of your monitor/computer.
5.Connect the USB cable to the USB port on the back of your monitor/computer.
6.Turn on your computer and monitor. If your monitor displays an image, installation is complete.