Samsung 930ND user manual Cannot see the On Screen Display, Screen suddenly has become unbalanced

Page 67

Troubleshooting

A:If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum Mode", "Recommended Mode 1280 x 1024 60 Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

Q:There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals?

A:The monitor is in PowerSaver mode.

A:Press a key on the keyboard to activate the monitor and restore the image on the screen.

A:If there is still no image, press the '/SOURCE' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

Q:Connected using the DVI cable?

A:You may get a blank screen if you boot the system before you connect the DVI cable, or dis- connect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals. Connect the DVI cable and then reboot the system.

I cannot see the On Screen Display.

Q:Have you locked the On Screen Display (OSD) Menu to prevent changes?

A:Unlock the OSD by pressing the [MENU/ ] button for at least 5 seconds.

The screen shows strange colors or just black and white.

Q:Is the screen displaying only one color as if looking at the screen through a cellophane paper?

A:Check the signal cable connection.

A:Make sure the video card is fully inserted in its slot.

Q:Have the screen colors become strange after running a program or due to a crash between ap- plications?

A:Reboot the computer.

Q:Has the video card been set properly?

A:Set the video card by referring to the video card manual.

The screen suddenly has become unbalanced.

Q:Have you changed the video card or the driver?

A:Adjust screen image position and size using the OSD.

Q:Have you adjusted the resolution or frequency to the monitor?

A:Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes).

Image 67

Contents SyncMaster 930ND LCD MonitorNotational Conventions Safety InstructionsPower NotationalInstallation Clean Others Page Page Page Page Unpacking Features What is a PC over IP?Package Contents IntroductionSold separately Your Monitor Initial Settings§Manuals CablesMenu button Menu FrontRear Power IndicatorDVI OUT Using the Anti-Theft Kensington Lock Connecting USB Connecting CablesConnections Host PC Hub LAN Cable Connect to the host PC using a LAN cableConnecting MIC Connecting HeadphoneTilt angle Using the Stand Swivel standAttaching a Base Page Internet web site Using the SoftwareInstalling the Monitor Driver Automatic Monitor DriverInstalling the Monitor Driver Manual Page Page Page Page Page Page How to delete the Natural Color software program How to install the Natural Color softwareNatural Color Natural Color Software Program Installation Problems MagicTune InstallationSystem Requirements MultiScreen UninstallMB Memory above MB Hard disk space above Connect Screen PCoIP On Screen Display OSDConnect Button OSD Options Menu Configuration Diagnostics Information User Settings PasswordNetwork ConfigurationGateway Enable DhcpIP Address Subnet MaskConnection Management Session Enable DiscoveryEnable Host Discovery DiscoveryBandwidth Terminal Server Port ResolutionAudio Mode BitdepthKeyboard Layout Enable WallpaperEnable Themes LanguageScreen-Saver Text Screen-Saver TimeoutReset Reset ParametersSession Statistics DiagnosticsEvent Log View event log messagePCoIP Processor Packet Size Ping SettingsPing IntervalFirmware Information PacketsInformation VPD InformationMouse Bootloader InformationUser Settings PCoIP Processor RevisionImage KeyboardConfirm New Password PasswordOld Password New PasswordDirect Functions Adjusting the MonitorOSD Lock & Unlock Page Disconnect Server PowerOSD Function VolumeLanguage Position Transparen Display Time Picture Brightness Setup Reset InformationContrast MagicBright MagicColor ColorColor Control Color ToneGamma Color EffectFine Image CoarseMode Position SharpnessYou can choose one of nine languages Position Sec 10 sec 20 sec 200 sec TransparencyDisplay Time Off OnNo Yes Setup ResetUseful Tips TroubleshootingSelf-Test Feature Check EnvironmentNo images on the screen. I cannot turn on the monitor Check ListScreen shows strange colors or just black and white Cannot see the On Screen DisplayScreen suddenly has become unbalanced Problems related to Audio Screen is out of focus or OSD cannot be adjustedLED is blinking but no images on the screen MagicTune doesnt work properly Check when MagicTune does not function properlyPage General SpecificationsPlug and Play Capability PowerSaverPreset Timing Modes Environmental considerationsSpecifications For Better Display InformationProduct Information Image Retention Free Display Information together with Logo or Moving image cycle Page Our LCD Monitor satisfies ISO13406-2 Pixel fault Class Latin America AppendixContact Samsung Worldwide North AmericaAsia Pacific CISMiddle East & Africa TermsAuthority Correct DisposalCorrect disposal of batteries in this product Europe only Appendix