Samsung 930ND user manual PCoIP On Screen Display OSD, Connect Screen, Connect Button

Using the Software

Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program".

Select Multiscreen from the list and then click the "Add/Delete" button.

PCoIP

On Screen Display (OSD)

The On Screen Display (OSD) local GUI (Portal only) is displayed to the user when the device is powered on and a PC-over-IP session is not in progress. The OSD provides a mechanism to connect to a host device via the Connect Screen. The Connect Screen is presented to the user on startup.

The Connect Screen also allows access to the Settings Window. The Settings Window is accessible through the Settings button on the Connect Screen. An administrative password is required to change Portal settings.

Connect Screen

The Connect Screen is shown on startup except when the Portal has been configured for a managed start-up or auto-reconnect.

The logo displayed above the Connect button can be changed by uploading a information on updating the Connect Screen logo.

Connect Button

A user can select the Connect button to initiate a PC-over-IP or RDP session depending on the session settings. While the PC-over-IP connection is pending, the OSD local GUI will display a “Connection Pending” message. When the connection is established, the OSD local GUI will disappear and be replaced with the session image.