Question
How can I change the frequency?
How can I adjust the resolution?
How can I set the Power Saving function?
The monitor makes a sound when it is turned on.
How can I clean the outer case/Picture tube?
Answer
Frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)
Windows ME/XP/2000 : Set the resolution at the Control Panel→Display→Settings.
* Contact the video card manufacturer for details.
Windows ME/XP/2000 : Set the function at
This is normal as some sound may be generated when the metal case and the electromagnet, which are installed to block any electromagnetic waves, interact with each other.
Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water.
Do not leave any remains of the detergent nor scratch the case. Do not allow any water to go inside the monitor.
Highlight Zone III Q & A
Question | Answer |
The program does not function properly.
Started a multimedia program but the Highlight Zone function does not automatically activate.
Changed the setting to Highlight Zone in Manual Detect mode but the Highlight Zone feature has not been activated
Want to turn the Auto Detect function off.
Highlight Zone III features a combination of circuitry and software built on proprietary technology of SEC. Therefore, the Highlight Zone III feature is found only on SEC monitors that support the feature.
Check if your monitor supports the Highlight Zone III feature.
If not, the Highlight Zone III icon will show a message saying, "No
Connection" (
)Connect the monitor properly before using it. Neither Automatic Detect or nor Manual Detect function while the icon shows the message, "No Connection". You can only exit the program.
Check the Highlight Zone III menu and see if Disable Auto Detect is selected.
When selected, the Highlight Zone function is not automatically activated.
The function may not be activated automatically for some multimedia programs.
In this case, use Manual Detect instead. See Manual Detect under (Highlight Zone III)
Check the color settings and see if sRGB is selected.
When sRGB is selected, the Highlight Zone III function remains
* Contact the video card manufacturer for details.
Check the color setting of the monitor and see if sRGB is selected.
When sRGB is selected, the Highlight Zone function remains de- activated in order to maintain the sRGB color attributes.
Some of the windows may not be selected when Highlight Zone function is on.
Set Disable Auto Detect to off from the Highlight Zone III menu. See (Highlight Zone III functions)