Don¡¯t know whether the Highlight program is running.
When a Highlight Zone is on, the rest of the screen dims.
The Highlight Zone appears too dark.
Want to adjust the position and size of the Highlight Zone.
Cannot select Picture Setting.
Self-Test Feature Check
Check the icon on the taskbar.
(
) indicates the function is activated and (
)shows it has been deactivated.
Monitors with the Highlight Zone feature are equipped with an Automatic Beam Control function. When activated, this may cause slight dimming of the surrounding screen. However, this does not indicate a malfunction of any kind, and it is safe to continue to use the product.
Check the Contrast value in Picture Setting and adjust it for your ideal viewing.
You can change the position and/or the size of the Highlight Zone easily using the Manual Detect function.
See (Highlight Zone III functions)
The Picture Setting feature can be selected only when the Highlight Zone function is on.
Turn the Highlight Zone function on before selecting Picture Setting.
Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.
1.Turn off both your computer and the monitor.
2.Unplug the video cable from the back of the computer.
3.Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below.
This box appears during normal operation if the video cable becomes disconnected or damaged.
4.Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after using the previous procedure, check your video controller and computer system; your monitor is functioning properly.
Warning Messages
If there is something wrong with the input signal, the message below appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable.