Samsung 400T manual Beginning Main Screen, Beginning Port Setting

Page 22

3. Beginning – Main Screen

Click Start > Program > Multiple Display Control to start the program.

Select a set to see the volume of the selected set within the slider.

Main Icons

Control Tools

Display Selection

Title

Select Button

Remocon

Info Grid

Comm. Status

 

 

1.Use the main icons to switch into each screen.

2.Select a display from Display Selection.

3.Click Select all or Clear to select or clear all displays.

4.Use Grid to view brief information on selected display.

5.Use Control Tools to control displays.

6.The current title to be controlled is displayed.

7.Allows you to enable or disable the remote control signal receiving function of the display unit.

8.Indicates the communication status between the LCD and the display. Shows “Busy” while communicating and “Idle when the communication is off.

<Note> The remote control Enable/Disable function operates whether or not the power is On/Off, and this applies to all displays connected to the displays connected to the MDC However, regardless of the status at the time the MDC is shut down, the remote control signal receiving function of all displays is initialized to Enable when the MDC is closed.

3. Beginning – Port Setting

Image 22
Contents SyncMaster 400T English Main Index Notational Do not use a damaged or loose plug PowerUse only a properly grounded plug and receptacle Place the monitor on a flat and stable surface Do not drop the monitor when moving itDo not cover the vents on the monitor cabinet Set down the monitor carefullyCleaning Do not place any heavy objects on the monitor Keep all power adaptors apartOther Do not use or store inflammable substances near the monitorRemove and discard vinyl bag from power adaptor before use Keep power adaptor away from any other heat sourceAlways keep power adaptor in well-ventilated area Front Rear Remote Control Mechanical Lay-out UnpackingFront Source buttonRemote Control Mechanical Lay-out RearButton Names Remote ControlReplacing Batteries Page Monitor Head Rear Speaker Mechanical Lay-outSpeaker Mounting Bracket Connecting to a VCR Connecting to a ComputerConnecting Your Monitor Connecting to a DVD Player Connecting a CamcorderConnecting D-TV Set Top Box Connecting SpeakersConnecting to an Audio System and Sub-woofer Introduction InstallMultiple Display Control MDC Page Beginning Port Setting Beginning Main ScreenPower Control Beginning Port ChangeInput Source Control Aspect Ratio Control Video / S-Video / DVD Aspect Ratio Control DTV Aspect Ratio Control PC Analog / PC DigitalTime Control Settings Control Picture Settings Control PictureRGBSettings Control Audio Settings Control Image Lock PC Analog Only TroubleshootingSettings Value Display In Multiple Display Mode Up / Down Key Move button Volume button / Select button Remote Control ButtonsPower indicator Monitor ButtonsExit button Press the menu to exit Menu button Caption button Press to set caption on/off Location button VCR-ControlsStill Volume PC Analog Screen PC Digital Screen Video / S-Video ScreenDVD / DTV Screen Fine tune Check before calling for service Problems and Solutions Self-Test Feature CheckVideo mode not supported For Better DisplayMaintenance and Cleaning Dot AcceptableProblems related to Installation Problems related to ScreenProblems related to Audio Problems related to Remote ControlQuestion Answer PowerSaver Preset Timing Modes GeneralAudio Characteristics PowerSaver EPA/ENERGYHorizontal Frequency Preset Timing ModesPreset Timing Modes Vertical FrequencyService Center BrazilEspaña United KingdomNETHERLANDS/BELGIUM/LUXEMBOURG Resolution Sync SignalTypes of Sync Signals Dot PitchUser Information RegulatoryFCC Information User Instructions IC Compliance NoticeEuropean Notice Europe only PCT NoticeNatural Color Software Program How to install the Natural Color softwareHow to delete the Natural Color software program Natural ColorAuthority