Samsung 213T manual Front

User’s Manual

Introduction

Front

1.Auto button Use this button to auto adjustment direct access.

2.Exit button Use this button to Exit the active menu or the OSD.

Source button When you push the Source button while the OSD is off, the input source (analog/digital) is alternated. (When you push the Source button to change the input source or turn on the monitor, a message appears in the center of the screen displaying the current input source -- analog or digital.)

Note:If you select the Digital mode, you must connect your monitor to the graphic card with a digital port using the DVI cable.

3.Adjust buttons These buttons allow you to highlight and adjust items in the menu.

4.Menu button Use this button to open the OSD and activate a highlighted menu item.

5.Power button Use this button to turn the monitor on and off.(When the power is turned on, a message appears in the center of the screen displaying the current mode -- analog or digital input signal.)

6.Power indicator This light glows green during normal operation, and blinks green once as the monitor saves your adjustments.

Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.