Samsung 204T manual Do not place the monitor face down

Page 5

Do not place the monitor face down.

zThe TFT-LCD surface may be damaged.

Installing a wall bracket must be done by a qualified professional.

zInstallation by unqualified personnel may result in injury.

zAlways use the mounting device specified in the owner's manual.

When installing the product, make sure to keep it away from the wall (more than 10cm/4inch ) for ventilation purposes.

zPoor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.

Clean

When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric.

Do not spray water or detergent directly on the monitor.

zThis may cause damage, electric shock or fire.

Use the recommended detergent with a smooth cloth.

If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth.

zA dirty connector may cause an electric shock or fire.

Make sure to unplug the power cord before cleaning the product.

zOtherwise, this may cause electric shock or fire.

Image 5
Contents SyncMaster 204T Notational Use only a properly grounded plug and receptacle Insert the power plug firmly so that it does not come looseDo not use a damaged or loose plug Keep any heating devices away from the power cable Do not drop the monitor when moving itDo not place the product on the floor Set down the monitor carefullyDo not spray water or detergent directly on the monitor Do not place the monitor face downDo not remove cover or back Never insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetFalling product could cause physical damage even death Monitor Manual Quick Setup Guide Natural Color, MagicTuneUsers Guide, Monitor Driver MagicRotation softwareMenu button Brightness button Enter button / Source button Sub Cable Power Cord Sold separately DVI Cable Set-BracketAuto button Power buttonMagicBright button CustomPage Stand Height Adjustment Connecting the Monitor Attaching a Base Using the Stand Removing the baseClick Windows ME Driver Windows MEWindows XP/2000 Click Windows XP/2000 DriverMicrosoft Windows XP Operating System Installing the Monitor Driver ManualPage How to install Linux Operating System Click Start , Setting , Control PanelMicrosoft Windows NT Operating System Natural Color Natural Color Software Program How to install the Natural Color softwareAuto Auto Locked unlocked OSD Lock & UnlockSource DescriptionPlay/Stop Brightness ContrastCoarse Fine Sharpness Position GammaLanguage Position Transparency Display Time Auto Source Image Reset Color Reset Page Overview Installation Page Installationation Problems Hardware Applies any changes made and exits MagicTune To execute Magic Pivot, it should be done as belowTray menu Brightness ResolutionContrast MagicBrightControl Color ToneGamma MagicColorSharpness Image SetupPosition Asset ID PreferencesSource Select Page Color Calibration How multiple users can use adjusted color valuesPage Uninstall Troubleshooting Overview Installation Page Installationation Problems System Requirements Interface Page Page Uninstall Troubleshooting When connecting DVI cabel When connecting D-Sub cableThere is no image on the screen Control Panel → Display → SettingsQuestion Useful Tips General Environmental considerations Preset Timing ModesDisplay Mode Frequency Pixel Clock Sync Polarity KHz MHz Chile Sonda S.A Germany United Kingdom PanamaDot Pitch ResolutionVertical Frequency Horizontal FrequencyAuthority Suggestions for specific applications What is Image retention ?Power Off, Screen Saver, or Power Save Mode