Samsung 204T manual Environmental considerations, Preset Timing Modes

Page 63

Dimensions (WxDxH)/ Weight

445 X 457.2 X 228.5 mm / 17.5 X 18 X 9.0 inch (With Stand) / 8.15kg

VESA Mounting Interface

100mm x 100mm (for use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating

Temperature: 50°F ~ 104°F (10°C ~ 40°C)

 

Humidity: 10% ~ 80%, non-condensing

Storage

Temperature: -4°F ~113 °F (-20°C ~ 45°C)

 

Humidity: 5% ~ 95%, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Note: Design and specifications are subject to change without prior notice.

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

State

Normal Operation

Power saving mode

Power Switch off

EPA/ENERGY 2000

 

 

 

Power Indicator

Green

Green, Blinking

Black

 

Analog/Digital

Analog/Digital

Less than 0W

Power Consumption

Less than 2W

Less than 50W

(120Vac/220 Vac)

 

(Off-mode)

 

 

 

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.

Table 1. Preset Timing Modes

Horizontal Vertical

Image 63
Contents SyncMaster 204T Notational Insert the power plug firmly so that it does not come loose Do not use a damaged or loose plugUse only a properly grounded plug and receptacle Set down the monitor carefully Do not drop the monitor when moving itKeep any heating devices away from the power cable Do not place the product on the floorDo not spray water or detergent directly on the monitor Do not place the monitor face downDo not remove cover or back Never insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetFalling product could cause physical damage even death MagicRotation software Quick Setup Guide Natural Color, MagicTuneMonitor Manual Users Guide, Monitor DriverMenu button Brightness button Enter button / Source button Sub Cable Power Cord Sold separately DVI Cable Set-BracketCustom Power buttonAuto button MagicBright buttonPage Stand Height Adjustment Connecting the Monitor Attaching a Base Using the Stand Removing the baseClick Windows XP/2000 Driver Windows MEClick Windows ME Driver Windows XP/2000Microsoft Windows XP Operating System Installing the Monitor Driver ManualPage How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating SystemLinux Operating System Natural Color Natural Color Software Program How to install the Natural Color softwareAuto Auto Locked unlocked OSD Lock & UnlockSource DescriptionPlay/Stop Brightness ContrastCoarse Fine Sharpness Position GammaLanguage Position Transparency Display Time Auto Source Image Reset Color Reset Page Overview Installation Page Installationation Problems Hardware To execute Magic Pivot, it should be done as below Tray menuApplies any changes made and exits MagicTune MagicBright ResolutionBrightness ContrastControl Color ToneGamma MagicColorImage Setup PositionSharpness Preferences Source SelectAsset ID Page Color Calibration How multiple users can use adjusted color valuesPage Uninstall Troubleshooting Overview Installation Page Installationation Problems System Requirements Interface Page Page Uninstall Troubleshooting When connecting DVI cabel When connecting D-Sub cableThere is no image on the screen Control Panel → Display → SettingsQuestion Useful Tips General Environmental considerations Preset Timing ModesDisplay Mode Frequency Pixel Clock Sync Polarity KHz MHz Chile Sonda S.A Germany United Kingdom PanamaHorizontal Frequency ResolutionDot Pitch Vertical FrequencyAuthority What is Image retention ? Power Off, Screen Saver, or Power Save ModeSuggestions for specific applications