Samsung BN59-00977A-00 user manual Self-Test Feature Check, Maintenance and Cleaning

Page 88

Troubleshooting

Self-Test Feature Check

Note

Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself.

Self-Test Feature Check

1.Turn off both your computer and the LCD Display.

2.Unplug the video cable from the back of the computer.

3.Turn on the LCD Display.

The figure shown below ("Check Signal Cable") appears on a black background when the LCD Display is working normally even though no video signal is detected: While in the Self-Test mode, the LED power indicator remains green and the figure moves around on the screen.

4.Turn off your LCD Display and reconnect the video cable; then turn on both your com- puter and the LCD Display

If your LCD Display screen remains blank after using the previous procedure, check your video controller and computer system; your LCD Display is functioning properly.

Warning Messages

You can even view the screen at a resolution of 1920 x 1080. However, you will receive the following message for a minute; You can choose to change the screen resolution or stay in the current mode during that time. If the resolution is more than 85Hz, you will see the black screen because the LCD Display does not support over 85Hz.

Note

Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported by the LCD Display.

Maintenance and Cleaning

1) Maintaining the LCD Display Case.

Clean with a soft cloth after disconnecting the power cord.

Image 88

Contents LCD Display SyncMaster 230TSN/230MXNSafety Instructions PowerInstallation Clean Others Page Page Page Page Package Contents UnpackingInstalling a Wall Mount Sold separatelyYour LCD Display Front PC → Hdmi → MagicInfoPower indicator RearRGB Using the Anti-Theft Kensington Lock Remote ControlPower MTS Return Connecting a Computer Connecting to Other devicesConnecting Using a DVI to Hdmi Cable Connecting Using a Hdmi CableConnecting to another Monitor Connecting a LAN Cable Connecting a USB deviceConnections Monitor Driver Installing the Monitor Driver AutomaticInternet web site Installing the Monitor Driver Manual Page Page Page Page Page Page Installation Problems MDC Multi-Display Channel InstallationUninstall Using the Software Using MDC Introduction Main ScreenPort Selection Power Control Page Input Source PC Mode Page Image Size PC, BNC, DVIImage Size TV, AV, S-Video, Component, DVIHDCP, HDMI, DTV TimePIP PIP Size PIP Source Settings Picture Settings Picture PC Settings Audio Settings SRS TS XTMaintenance Lamp Control Image LockMaintenance Scroll Maintenance Video Wall Page Troubleshooting Settings Value Display In Multiple Display ModePage Input Available Modes Source ListEdit Name MagicInfoPicture PC / MagicInfo Mode Available Modes MagicBrightCustom ContrastBrightness SharpnessColor Control RedGreen BlueColor Temp Image LockCoarse FineSignal Balance Auto AdjustmentPosition Gain Signal ControlOffset Size Dynamic ContrastPicture Hdmi Mode Available Modes Brightness SensorMode OffColor Dynamic Standard Movie CustomTint Digital NR Digital Noise Reduction Zoom Just ScanFilm Mode Music Sound Available ModesSpeech Auto Volume BassTreble BalanceSetup Available Modes LanguageTime Sleep TimerClock Set On Timer Off TimerMenu Transparency HighSafety Lock Change PIN Lock OnEnergy Saving Medium Low OpaqueVideo Wall Hdmi Black LevelNormal Low Format HorizontalVertical FullScreen Divider Safety ScreenPixel Shift Horizontal Dot Vertical LineTimer ScrollPeriod ScrollBar Eraser Mode-Scroll 1~5 sec Mode-Bar,Eraser 10~50 secBar Resolution SelectEraser Power On Adjustment Side GrayOff 1024 x 1280 x 1360 x 1366 x Off Light DarkReset Image ResetColor Reset OSD RotationLamp Control Multi Control Available ModesMulti Control MagicInfo Available ModesMagicInfo Page Page Page Self-Test Feature Check Maintenance and CleaningProblems related to the Installation PC Mode Symptoms and Recommended ActionsCheck List Check Signal Cable message Problems related to the ScreenNot Optimum Mode message Problems related to Audio Problems related to the Remote ControlPage Page General PowerSaver Vesa Mounting InterfaceEnvironmental con- siderations Plug and Play CapabilityPreset Timing Modes MHz KHzPage For Better Display Product Information Image Retention FreeDisplay Information together with Logo or Moving image cycle Page Our LCD Monitor satisfies ISO13406-2 Pixel fault Class Contact Samsung Worldwide North AmericaLatin America EuropeCIS Terms Asia PacificCorrect Disposal SRS TS XTAuthority Correct disposal of batteries in this product Europe onlyAppendix