5-2 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature.
| STATE | NORMAL OPERATION | POWER SAVING MODE | POWER OFF |
| | | | |
| | S16A100N: 8 watts | | |
| Power Consumption | | 0.3 watts | 0.3 watts |
| S19A100N: 17 watts |
| (Typical) |
| | | |
| S22A100N: 25 watts | | |
| | | |
| | | | |
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.