Samsung G19P Plus manual Modes, Control Panel → Display →

Page 37

I cannot see the On Screen Display.

The screen shows strange colors or just black and white.

Connected using the DVI cable?

Have you locked the On Screen Display (OSD) Menu to prevent changes?

Is the screen displaying only one color as if looking at the screen through a cellophane paper?

Have the screen colors become strange after running a program or due to a crash between applications?

can handle properly.

If the display exceeds SXGA or 75 Hz, a "Not Optimum

Mode","Recommended Mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum

Mode","Recommended Mode 1280 x 1024 60 Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals.

Connect the DVI cable and then reboot the system.

Unlock the OSD by pressing the MENU/ button for at least 5 seconds.

Check the signal cable connection.Make sure the video card is fully inserted in it's slot.

Reboot the computer.

 

Has the video card been set

Set the video card by referring to

 

properly?

the video card manual.

The screen suddenly has

Have you changed the video card

Adjust screen image position

become unbalanced.

or the driver?

and size using the OSD.

 

Have you adjusted the resolution

Adjust the resolution and

 

or frequency to the monitor?

frequency at the video card.

 

 

(Refer to the Preset Timing

 

 

Modes).

The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

The screen is out of focus or OSD cannot be adjusted.

Have you adjusted the resolution or frequency on the monitor?

Adjust the resolution and frequency of the video card. (Refer to the Preset Timing Modes).

LED is blinking but no images on the screen.

There are only 16 colors shown on the screen. The screen colors have

Is the frequency properly adjusted when checking the Display Timing on the menu?

Have the Windows colors been set properly?

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.

(The maximum frequency per resolution may differ from product to product.)

Windows ME/2000/XP:

Set the colors properly at the

Control Panel → Display →

Page 36 Page 38
Image 37
Page 36 Page 38
Contents SyncMaster G19PPlus Notational PowerDo not disconnect the power cord while using the monitor Insert the power plug firmly so that it does not come looseDo not use a damaged or loose plug Use only a properly grounded plug and receptacleDo not drop the monitor when moving it InstallationDo not place the product on the floor Keep any heating devices away from the power cable CleanPut down the monitor carefully Do not place the monitor face downDo not spray water or detergent directly onto the monitor OthersDo not remove the cover or back Do not cover the vents on the monitor cabinet Do not install inside a vehicleNever insert anything metallic into the monitor openings Page Product unplugged Good Postures When Using the MonitorUnpacking Cable Sub Cable Power Cord Sold separately DVI Cable Warranty Card Users Guide Quick Setup GuideFront Monitor DriverRear Kensington Lock For using a locking device, contact the place of purchaseRGB Connecting the MonitorDVI Monitor Assembly Using the StandFolding the Base Attaching a BaseInstalling the Monitor Driver Automatic Microsoft Windows Vista Operating System Installing the Monitor Driver ManualPage Page Microsoft Windows XP Operating System Page How to install Microsoft Windows Millennium Operating System Natural ColorMicrosoft Windows NT Operating System Linux Operating SystemInstalling the Natural Color Software Auto Menu OSD Lock & UnlockDescription Menu Description Deactivate the OSD adjustment lock functionBrightness MagicBrightSource Brightness Contrast Color Not available in MagicBright mode of Dynamic ContrastDescriptionPlay/Stop MagicColor Color Tone Color Control Gamma ImageCoarse Fine Sharpness Position OSDLanguage Position Transparency Display Time Setup Information Auto Source Image Reset Color ResetInformation Solutions Symptom Check ListCheck List Control Panel → Display → ModesSettings Self-Test Feature CheckQuestion AnswerUseful Tips Self-Test Feature CheckGeneral PowerSaver Pixel Clock Sync Polarity Display Mode Frequency MHz KHz Preset Timing ModesHorizontal Horizontal FrequencyNorth America Contact Samsung WorldwideLatin America EuropeAsia Pacific CISMiddle East & Africa TermsAuthority For Better DisplayWhat is Image retention ? WarrantyPower Off, Screen Saver, or Power Save Mode Suggestions for specific applications
Top Page Image Contents