Samsung G19P Plus Do not install inside a vehicle, Do not cover the vents on the monitor cabinet

Page 7

do not install inside a vehicle.

zThis may cause a malfunction, electric shock or fire.

zIn particular, avoid operating the monitor near water or outdoors where it could be exposed to snow or rain.

If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact a Service Center .

zThe monitor may malfunction, causing electric shock or fire.

Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time.

zFailure to do so may cause electric shock or fire.

Do not try to move the monitor by pulling only the wire or the signal cable.

zThis may cause a breakdown, electric shock or fire due to damage to the cable.

Do not move the monitor right or left by pulling only the wire or the signal cable.

zThis may cause a breakdown, electric shock or fire due to damage to the cable.

Do not cover the vents on the monitor cabinet.

zBad ventilation may cause a breakdown or fire.

Do not place water containers, chemical products or small metal objects on the monitor.

zThis may cause a malfunction, electric shock or fire.

zIf a foreign substance enters the monitor, unplug the power cord and contact a Service Center.

Keep the product away from combustible chemical sprays or inflammable substances.

zThis may cause an explosion or fire.

Never insert anything metallic into the monitor openings.

zThis may cause electric shock, fire or injury.

Image 7
Contents SyncMaster G19PPlus Notational PowerUse only a properly grounded plug and receptacle Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Do not use a damaged or loose plugDo not drop the monitor when moving it InstallationDo not place the product on the floor Do not place the monitor face down CleanKeep any heating devices away from the power cable Put down the monitor carefullyDo not spray water or detergent directly onto the monitor OthersDo not remove the cover or back Do not cover the vents on the monitor cabinet Do not install inside a vehicleNever insert anything metallic into the monitor openings Page Product unplugged Good Postures When Using the MonitorUnpacking Monitor Driver Warranty Card Users Guide Quick Setup GuideCable Sub Cable Power Cord Sold separately DVI Cable FrontRear Kensington Lock For using a locking device, contact the place of purchaseRGB Connecting the MonitorDVI Attaching a Base Using the StandMonitor Assembly Folding the BaseInstalling the Monitor Driver Automatic Microsoft Windows Vista Operating System Installing the Monitor Driver ManualPage Page Microsoft Windows XP Operating System Page How to install Linux Operating System Natural ColorMicrosoft Windows Millennium Operating System Microsoft Windows NT Operating SystemInstalling the Natural Color Software Auto Menu OSD Lock & UnlockDescription Menu Description Deactivate the OSD adjustment lock functionBrightness MagicBrightSource Brightness Contrast Color Not available in MagicBright mode of Dynamic ContrastDescriptionPlay/Stop MagicColor Color Tone Color Control Gamma ImageCoarse Fine Sharpness Position OSDLanguage Position Transparency Display Time SetupInformation Auto Source Image Reset Color ResetInformation Solutions Symptom Check ListCheck List Control Panel → Display → ModesAnswer Self-Test Feature CheckSettings QuestionUseful Tips Self-Test Feature CheckGeneral PowerSaver Horizontal Frequency Preset Timing ModesPixel Clock Sync Polarity Display Mode Frequency MHz KHz HorizontalEurope Contact Samsung WorldwideNorth America Latin AmericaAsia Pacific CISMiddle East & Africa TermsAuthority For Better DisplaySuggestions for specific applications WarrantyWhat is Image retention ? Power Off, Screen Saver, or Power Save Mode