Samsung G19P Plus manual Self-Test Feature Check, Settings, Question, Answer

Page 38

changed after changing the video card.

 

Has the video card been set

 

properly?

There is a message that

Have you installed the monitor

reads "Unrecognized

driver?

monitor, Plug & Play (VESA

 

DDC) monitor found".

See the video card manual to see

 

 

if the Plug & Play (VESA DDC)

 

function can be supported.

Settings.

Set the video card by referring to the video card manual.

Install the monitor driver according to the Driver Installation Instructions.

Install the monitor driver according to the Driver Installation Instructions.

Check the following items if there is trouble with the monitor.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an a service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz. (Do not exceed 75 Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel→System→Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur, contact an authorized service center.

Q & A

Question

How can I change the frequency?

Answer

The frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)

How can I adjust the resolution?

How can I set the Power Saving function?

How can I clean the outer case/LCD Panel?

Windows ME/XP/2000 : Set the resolution in the Control Panel → Display → Settings.

* Contact the video card manufacturer for details.

Windows ME/XP/2000 : Set the function in the BIOS-SETUP of the computer or the screen saver. (Refer to the Windows / Computer Manual).

Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water.

Do not leave any detergent or scratches on the case. Do not let any water enter the monitor.

Self-Test Feature Check

Self-Test Feature Check Warning Messages Environment Useful Tips

Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.

Page 37 Page 39
Image 38
Page 37 Page 39
Contents SyncMaster G19PPlus Power NotationalDo not use a damaged or loose plug Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Use only a properly grounded plug and receptacleDo not place the product on the floor InstallationDo not drop the monitor when moving it Put down the monitor carefully CleanKeep any heating devices away from the power cable Do not place the monitor face downDo not remove the cover or back OthersDo not spray water or detergent directly onto the monitor Never insert anything metallic into the monitor openings Do not install inside a vehicleDo not cover the vents on the monitor cabinet Page Good Postures When Using the Monitor Product unpluggedUnpacking Front Warranty Card Users Guide Quick Setup GuideCable Sub Cable Power Cord Sold separately DVI Cable Monitor DriverRear For using a locking device, contact the place of purchase Kensington LockDVI Connecting the MonitorRGB Folding the Base Using the StandMonitor Assembly Attaching a BaseInstalling the Monitor Driver Automatic Installing the Monitor Driver Manual Microsoft Windows Vista Operating SystemPage Page Microsoft Windows XP Operating System Page How to install Microsoft Windows NT Operating System Natural ColorMicrosoft Windows Millennium Operating System Linux Operating SystemInstalling the Natural Color Software Auto Description OSD Lock & UnlockMenu Deactivate the OSD adjustment lock function Menu DescriptionMagicBright BrightnessSource DescriptionPlay/Stop Color Not available in MagicBright mode of Dynamic ContrastBrightness Contrast Image MagicColor Color Tone Color Control GammaOSD Coarse Fine Sharpness PositionSetup Language Position Transparency Display TimeAuto Source Image Reset Color Reset Information Information Check List Symptom Check ListSolutions Modes Control Panel → Display →Question Self-Test Feature CheckSettings AnswerSelf-Test Feature Check Useful TipsGeneral PowerSaver Horizontal Preset Timing ModesPixel Clock Sync Polarity Display Mode Frequency MHz KHz Horizontal FrequencyLatin America Contact Samsung WorldwideNorth America EuropeCIS Asia PacificTerms Middle East & AfricaFor Better Display AuthorityPower Off, Screen Saver, or Power Save Mode WarrantyWhat is Image retention ? Suggestions for specific applications
Top Page Image Contents