Chapter 3. Connecting to External Devices
The product can be connected to an external device such as a monitor, VCR, Alarm Box, Door Bell Box, etc.
This chapter describes how to connect to external devices.
Caution
Make sure not to input more than 2V from the camera, video, or audio source, otherwise, it may cause a malfunction of the product.
1. Connecting to Time Lapse VCR (or Normal VCR)
TIME LAPSE VCR | VIDEO IN | VIDEO OUT |
|
| |
OR NORMAL VCR | AUDIO IN | AUDIO OUT |
| ||
| TRIGER OUT | TRIGER |
| VIDEO IN | VIDEO OUT |
| AUDIO IN | AUDIO OUT |
1)Connect the
2)Connect the VIDEO OUT plug to the VIDEO IN terminal of the VCR.
3)Connect the VIDEO IN plug to the VIDEO OUT terminal of the VCR.
4)Connect the AUDIO OUT plug to the AUDIO IN terminal of the VCR.
5)Connect the AUDIO IN plug to the AUDIO OUT terminal of the VCR.
6)Connect the TRIGGER plug to the REC TRIGGER OUT terminal of the VCR.
7)Connect the A/O (HOT) terminal on the rear panel to the Alarm IN terminal of the VCR.
8)Connect the A/O (COLD) terminal on the rear panel to the Ground terminal of the VCR.
9)Connect the A/R terminal on the rear panel to the Alarm Reset terminal of the VCR.
10)Connects the G (ground) terminal on the rear panel to the Ground terminal of the VCR.
Caution
The name of the REC TRIGGER OUT or Alarm terminal may change depending on the type of Time Lapse VCR.
Make sure to check the names of the terminals before connecting them.