Resetting Channels
1)Press the SET button. The border of the selected channel will blink.
2)Press the ENTER button at the center of the Rotary Wheel. Now, you can change to your desired channel.
3)Move to your desired channel using the Rotary Wheel and press ENTER to complete changing the channel.
4)If you want to reset to another channel, use the Rotary Wheel to move to the channel you want to change and the border of the selected channel will blink.
5)Repeat steps 2) and 3). When the resetting is completed, press the SET button.
The MULTISCREEN button will not operate in the following cases:
•While using the SETUP Menu
•While displaying the Event List or Door Bell List
•While replaying events
•While
•While setting a split screen
5.When you want to watch in Sequence Screen Mode.
The Sequence screen is available only in
The SEQUENCE button will not operate in the following cases:
•While operating in P.B. or TRIPLEX mode
•While using the SETUP Menu
•While setting or displaying a split screen
•While displaying the Event List or Door Bell List
•While replaying events
•While