Samsung SMO-150TP, SMO-210TP manual Password Change, Language

Page 39

• Select the first digit of the Password using the Rotary Wheel and press ENTER to move to the next digit. Repeat this step to enter the six-digit password and press ENTER to return to the SETUP MENU.

• If the Password is not correct, “ERROR TRY AGAIN” will appear at the bottom of the

e-39

screen. The message will disappear after the first digit of the Password is entered. Repeat this step until you have entered the six-digit password then press ENTER to move to the SETUP MENU. If the number is entered incorrectly more than three times, the display will return to the previous menu.

PASSWORD CHANGE...

•Select “PASSWORD CHANGE...” using the Rotary Wheel and press ENTER to display the current Password on the screen as shown below. The first digit of the number will be selected. (Factory default is 123456.)


	[SYSTEM SETTING]
	ALARM...
	RECORD...
	HIDDEN CAMERA...
	SEQUENCE		02 [SEC]
	SYSTEM ID		1
	PASSWORD CHECK		OFF
	PASSWORD CHANGE...			1	2345
	LANGUAGE		ENGLISH

•Select the first digit of the Password using the Rotary Wheel and press ENTER to select the second digit. Repeat the same until the six digits of the Password have been entered. Press ENTER to complete the change.

- You can use “0” to “9” for the Password.

LANGUAGE

•Select the desired language for the use in the Menu. ENGLISH, ESPAÑOL, FRANÇAIS, ITALIANO and GERMAN are available.

Image 39

Contents Color Monitor Graphic Symbol Explanation Important Safeguards Page Page FCC & Ices Information User-Installer CautionContents Setup Menu Settings Functions and Features OverviewOverview Power Switch Volume UP/DOWN Controls the volume levelNames and Functions of Parts Number Key0 ~ MultiscreenRear Panel ~AC Installation Environments InstallationUnpacking Connecting to Time Lapse VCR or Normal VCR Connecting to External DevicesConnecting the Ordinary monitor Connecting the Alarm SensorBasic Operation Turn the Power Switch OnSelect the Display Mode Basic OperationWhen you want to watch on LIVE/P.B./TRIPLEX screen When you want to watch in Full Screen ModeWhen you want to watch in Multi Screen Mode Resetting Channels When you want to watch in Sequence Screen ModeWhen you want to watch in Freeze Screen Mode Full Screen ModeSplit Screen Mode When you want to watch in Zoom Screen Mode When you want to watch on PIP Screen ModeUsing PIP Screen When you want to watch the VCR output When you want to watch the Event Replay screenWhen an Alarm/Motion signal is input When Channel Loss is detected When you want to watch a Door Bell screenSetup Menu Settings Setup MenuSUB Menu View Setting Date Type YY/MM/DD ↔ MM/DD/YY ↔ DD/MM/YY Date YY/MM/DD Camera Setup Press the Menu button to return to the previous menu User Area Shutter White Balance ATW, AWC, Manual Special Motion Detect PresetSystem Setting Alarm AlarmPB Through RecordSystem ID Password CheckHidden Camera SequenceLanguage Password ChangeEvent List Recording in Time Lapse or Normal Mode Alarm/Motion Channel Double-RecordingRecording Alarm Occurrence Alarm, Motion, Loss and Door BellPage Motion Occurrence Loss Occurrence Door Bell Occurrence Appendix SpecificationsTroubleshooting

Related manuals

Manual 2 pages 53.6 Kb

Manual 242 pages 60.54 Kb